Food Safety Response Center, Thermo Fisher Scientific, Im Steingrund 4-6, 63303 Dreieich, Germany.
Food Addit Contam Part A Chem Anal Control Expo Risk Assess. 2013;30(1):156-65. doi: 10.1080/19440049.2012.729162. Epub 2012 Oct 19.
An automated method involving on-line clean-up and analytical separation in a single run using TurboFlow™ reversed phase liquid chromatography coupled to a high resolution mass spectrometer has been developed for the simultaneous determination of deoxynivalenol, T2 toxin, HT2 toxin, zearalenone and fumonisins B1 and B2 in maize, wheat and animal feed. Detection was performed in full scan mode at a resolution of R = 100,000 full width at half maximum with high energy collision cell dissociation for the determination of fragment ions with a mass accuracy below 5 ppm. The extract from homogenised samples, after blending with a 0.1% aqueous mixture of 0.1% formic acid/acetonitrile (43:57) for 45 min, was injected directly onto the TurboFlow™ (TLX) column for automated on-line clean-up followed by analytical separation and accurate mass detection. The TurboFlow™ column enabled specific binding of target mycotoxins, whereas higher molecular weight compounds, like fats, proteins and other interferences with different chemical properties, were removed to waste. Single laboratory method validation was performed by spiking blank materials with mycotoxin standards. The recovery and repeatability was determined by spiking at three concentration levels (50, 100 and 200% of legislative limits) with six replicates. Average recovery, relative standard deviation and intermediate precision values were 71 to 120%, 1 to 19% and 4 to 19%, respectively. The method accuracy was confirmed with certified reference materials and participation in proficiency testing.
一种自动化方法,涉及在单个运行中在线净化和分析分离,使用 TurboFlow™反相液相色谱与高分辨率质谱仪联用,用于同时测定玉米、小麦和动物饲料中的脱氧雪腐镰刀菌烯醇、T2 毒素、HT2 毒素、玉米赤霉烯酮和伏马菌素 B1 和 B2。在全扫描模式下进行检测,分辨率为 R = 100,000,半最大值全宽为 100,000,采用高能碰撞池解离技术,用于测定质量准确度低于 5 ppm 的碎片离子。将均质样品的提取物与 0.1%甲酸/乙腈(43:57)的 0.1%水溶液混合 45 分钟后,直接注入 TurboFlow™(TLX)柱进行自动在线净化,然后进行分析分离和精确质量检测。TurboFlow™柱能够特异性结合目标霉菌毒素,而像脂肪、蛋白质和其他具有不同化学性质的干扰物等高分子量化合物则被去除到废物中。通过用霉菌毒素标准品对空白材料进行加标,进行单实验室方法验证。通过在三个浓度水平(法规限量的 50%、100%和 200%)下进行 6 次重复加标来确定回收率和重复性。平均回收率、相对标准偏差和中间精密度值分别为 71%至 120%、1%至 19%和 4%至 19%。该方法的准确性通过使用认证参考材料和参与能力验证得到了确认。