Department of Electronics and Multimedia Communications, Technical University of Košice, Park Komenského 13, Košice 04120, Slovakia.
Sensors (Basel). 2013 Sep 9;13(9):11969-97. doi: 10.3390/s130911969.
In the case of through-the-wall localization of moving targets by ultra wideband (UWB) radars, there are applications in which handheld sensors equipped only with one transmitting and two receiving antennas are applied. Sometimes, the radar using such a small antenna array is not able to localize the target with the required accuracy. With a view to improve through-the-wall target localization, cooperative positioning based on a fusion of data retrieved from two independent radar systems can be used. In this paper, the novel method of the cooperative localization referred to as joining intersections of the ellipses is introduced. This method is based on a geometrical interpretation of target localization where the target position is estimated using a properly created cluster of the ellipse intersections representing potential positions of the target. The performance of the proposed method is compared with the direct calculation method and two alternative methods of cooperative localization using data obtained by measurements with the M-sequence UWB radars. The direct calculation method is applied for the target localization by particular radar systems. As alternative methods of cooperative localization, the arithmetic average of the target coordinates estimated by two single independent UWB radars and the Taylor series method is considered.
在超宽带 (UWB) 雷达进行穿墙目标定位的情况下,有一些应用场景需要使用仅配备一个发射天线和两个接收天线的手持传感器。有时,使用这种小型天线阵列的雷达无法以所需的精度定位目标。为了提高穿墙目标定位的精度,可以使用基于融合来自两个独立雷达系统的数据的协作定位。本文介绍了一种新的协作定位方法,称为椭圆交点连接。这种方法基于目标定位的几何解释,其中使用适当创建的椭圆交点簇来估计目标位置,该簇代表目标的潜在位置。将所提出的方法的性能与直接计算方法以及使用 M 序列 UWB 雷达测量获得的数据进行的两种替代协作定位方法进行了比较。直接计算方法用于特定雷达系统的目标定位。作为协作定位的替代方法,考虑了通过两个独立的 UWB 雷达估计的目标坐标的算术平均值和泰勒级数方法。