Zhang Lin, Borror Connie M, Sandrin Todd R
School of Mathematical and Natural Sciences, Arizona State University, Phoenix, Arizona, United States of America.
PLoS One. 2014 Mar 24;9(3):e92720. doi: 10.1371/journal.pone.0092720. eCollection 2014.
MALDI-TOF MS has been shown capable of rapidly and accurately characterizing bacteria. Highly reproducible spectra are required to ensure reliable characterization. Prior work has shown that spectra acquired manually can have higher reproducibility than those acquired automatically. For this reason, the objective of this study was to optimize automated data acquisition to yield spectra with reproducibility comparable to those acquired manually. Fractional factorial design was used to design experiments for robust optimization of settings, in which values of five parameters (peak selection mass range, signal to noise ratio (S:N), base peak intensity, minimum resolution and number of shots summed) commonly used to facilitate automated data acquisition were varied. Pseudomonas aeruginosa was used as a model bacterium in the designed experiments, and spectra were acquired using an intact cell sample preparation method. Optimum automated data acquisition settings (i.e., those settings yielding the highest reproducibility of replicate mass spectra) were obtained based on statistical analysis of spectra of P. aeruginosa. Finally, spectrum quality and reproducibility obtained from non-optimized and optimized automated data acquisition settings were compared for P. aeruginosa, as well as for two other bacteria, Klebsiella pneumoniae and Serratia marcescens. Results indicated that reproducibility increased from 90% to 97% (p-value[Formula: see text]0.002) for P. aeruginosa when more shots were summed and, interestingly, decreased from 95% to 92% (p-value [Formula: see text] 0.013) with increased threshold minimum resolution. With regard to spectrum quality, highly reproducible spectra were more likely to have high spectrum quality as measured by several quality metrics, except for base peak resolution. Interaction plots suggest that, in cases of low threshold minimum resolution, high reproducibility can be achieved with fewer shots. Optimization yielded more reproducible spectra than non-optimized settings for all three bacteria.
基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)已被证明能够快速、准确地表征细菌。需要高度可重复的光谱来确保可靠的表征。先前的研究表明,手动采集的光谱比自动采集的光谱具有更高的可重复性。因此,本研究的目的是优化自动数据采集,以产生与手动采集的光谱具有可比性的可重复性光谱。分数因子设计用于设计实验,以对设置进行稳健优化,其中常用于促进自动数据采集的五个参数(峰选择质量范围、信噪比(S:N)、基峰强度、最小分辨率和累加的 shots 数)的值有所变化。铜绿假单胞菌被用作设计实验中的模型细菌,并使用完整细胞样品制备方法采集光谱。基于对铜绿假单胞菌光谱的统计分析,获得了最佳自动数据采集设置(即产生复制品质谱最高可重复性的那些设置)。最后,比较了铜绿假单胞菌以及另外两种细菌肺炎克雷伯菌和粘质沙雷氏菌在未优化和优化的自动数据采集设置下获得的光谱质量和可重复性。结果表明,对于铜绿假单胞菌,当累加更多的 shots 时,可重复性从90%提高到97%(p值[公式:见正文]<0.002),有趣的是,随着阈值最小分辨率的增加,可重复性从95%下降到92%(p值[公式:见正文]<0.013)。关于光谱质量,除了基峰分辨率外,通过几个质量指标测量,高度可重复的光谱更有可能具有高质量。交互图表明,在低阈值最小分辨率的情况下,用较少的 shots 就能实现高可重复性。对于所有三种细菌,优化后的光谱比未优化的设置具有更高的可重复性。