Kanno Manabu, Tamaki Hideyuki, Mitani Yasuo, Kimura Nobutada, Hanada Satoshi, Kamagata Yoichi
Bioproduction Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8566 Japan.
Biotechnol Biofuels. 2015 Apr 17;8:69. doi: 10.1186/s13068-015-0251-x. eCollection 2015.
Though butanol is considered as a potential biofuel, its toxicity toward microorganisms is the main bottleneck for the biological butanol production. Recently, butanol-tolerant bacteria have been proposed as alternative butanol production hosts overcoming the end product inhibition. One remaining key issue to be addressed is how physicochemical properties such as pH and temperature affect microbial butanol tolerance during cultivation and fermentation.
We investigated the pH effect on butanol tolerance of a high butanol-tolerant bacterium, Enterococcus faecalis strain CM4A. The strain grew over a broad pH range (pH 4.0 to 12.0) and preferred alkaline pH (pH 8.0 and 10.0) in the absence of butanol. However, in the presence of butanol, strain CM4A grew better under acidic and neutral pH conditions (pH 6.0 and 6.8). Membrane fatty acid analysis revealed that the cells exposed to butanol exhibited increased cyclopropane and saturated fatty acids, which contribute to butanol tolerance of the strain by decreasing membrane fluidity, more evidently at acidic and neutral pH than at alkaline pH. Meanwhile, the strain grown under alkaline pH without butanol increased short chain fatty acids, which is involved in increasing membrane fluidity for alkaline adaptation. Such a change was not observed in the cells grown under alkaline pH with butanol. These results suggested that strain CM4A simultaneously exposed to butanol and alkali stresses was not likely able to properly adjust membrane fluidity due to the opposite response to each stress and thereby showed low butanol tolerance under alkaline pH. Indeed, the cells exposed to butanol at alkaline pH showed an irregular shape with disrupted membrane structure under transmission electron microscopy observation, which also indicated the impact of butanol and alkali stresses on functioning of cellular membrane.
The study clearly demonstrated the alkaline pH-induced increase of cell susceptibility to butanol in the tested strain. Our findings indicate the non-negligible impact of pH on microbial butanol tolerance, providing a new insight into efficient butanol production.
尽管丁醇被认为是一种潜在的生物燃料,但其对微生物的毒性是生物法生产丁醇的主要瓶颈。最近,耐丁醇细菌被提议作为克服终产物抑制的替代丁醇生产宿主。一个有待解决的关键问题是,诸如pH值和温度等物理化学性质如何在培养和发酵过程中影响微生物对丁醇的耐受性。
我们研究了pH值对高耐丁醇细菌粪肠球菌CM4A菌株丁醇耐受性的影响。该菌株在较宽的pH范围内(pH 4.0至12.0)生长,在无丁醇的情况下更喜欢碱性pH(pH 8.0和10.0)。然而,在有丁醇的情况下,CM4A菌株在酸性和中性pH条件下(pH 6.0和6.8)生长得更好。膜脂肪酸分析表明,暴露于丁醇的细胞中,环丙烷和饱和脂肪酸增加,这通过降低膜流动性有助于菌株的丁醇耐受性,在酸性和中性pH条件下比在碱性pH条件下更明显。同时,在无丁醇的碱性pH条件下生长的菌株短链脂肪酸增加,这与增加膜流动性以适应碱性有关。在有丁醇的碱性pH条件下生长的细胞中未观察到这种变化。这些结果表明,同时暴露于丁醇和碱胁迫下的CM4A菌株由于对每种胁迫的相反反应而不太可能适当地调节膜流动性,从而在碱性pH条件下表现出较低的丁醇耐受性。事实上,在碱性pH条件下暴露于丁醇的细胞在透射电子显微镜观察下呈现出不规则形状,膜结构破坏,这也表明了丁醇和碱胁迫对细胞膜功能的影响。
该研究清楚地证明了在测试菌株中碱性pH诱导细胞对丁醇敏感性增加。我们的研究结果表明pH值对微生物丁醇耐受性有不可忽视的影响,为高效丁醇生产提供了新的见解。