†Department of Chemistry, University of California, Riverside, California 92521, United States.
‡Center for Nanoscale Science and Engineering, University of California, Riverside, California 92521, United States.
Acc Chem Res. 2015 Aug 18;48(8):2270-9. doi: 10.1021/acs.accounts.5b00107. Epub 2015 Aug 5.
Single-walled carbon nanotube (SWNT) thin films provide a unique platform for the development of electronic and photonic devices because they combine the advantages of the outstanding physical properties of individual SWNTs with the capabilities of large area thin film manufacturing and patterning technologies. Flexible SWNT thin film based field-effect transistors, sensors, detectors, photovoltaic cells, and light emitting diodes have been already demonstrated, and SWNT thin film transparent, conductive coatings for large area displays and smart windows are under development. While chirally pure SWNTs are not yet commercially available, the marketing of semiconducting (SC) and metallic (MT) SWNTs has facilitated progress toward applications by making available materials of consistent electronic structure. Nevertheless the electrical transport properties of networks of separated SWNTs are inferior to those of individual SWNTs. In particular, for semiconducting SWNTs, which are the subject of this Account, the electrical transport drastically differs from the behavior of traditional semiconductors: for example, the bandgap of germanium (E = 0.66 eV) roughly matches that of individual SC-SWNTs of diameter 1.5 nm, but in the range 300-100 K, the intrinsic carrier concentration in Ge decreases by more than 10 orders of magnitude while the conductivity of a typical SC-SWNT network decreases by less than a factor of 4. Clearly this weak modulation of the conductivity hinders the application of SC-SWNT films as field effect transistors and photodetectors, and it is the purpose of this Account to analyze the mechanism of the electrical transport leading to the unusually weak temperature dependence of the electrical conductivity of such networks. Extrinsic factors such as the contribution of residual amounts of MT-SWNTs arising from incomplete separation and doping of SWNTs are evaluated. However, the observed temperature dependence of the conductivity indicates the presence of midgap electronic states in the semiconducting SWNTs, which provide a source of low-energy excitations, which can contribute to hopping conductance along the nanotubes following fluctuation induced tunneling across the internanotube junctions, which together dominate the low temperature transport and limit the resistivity of the films. At high temperatures, the intrinsic carriers thermally activated across the bandgap as in a traditional semiconductor became available for band transport. The midgap states pin the Fermi level to the middle of the bandgap, and their origin is ascribed to defects in the SWNT walls. The presence of such midgap states has been reported in connection with scanning tunneling spectroscopy experiments, Coulomb blockade observations in low temperature electrical measurements, selective electrochemical deposition imaging, tip-enhanced Raman spectroscopy, high resolution photocurrent spectroscopy, and the modeling of the electronic density of states associated with various defects. Midgap states are present in conventional semiconductors, but what is unusual in the present context is the extent of their contribution to the electrical transport in networks of semiconducting SWNTs. In this Account, we sharpen the focus on the midgap states in SC-SWNTs, their effect on the electronic properties of SC-SWNT networks, and the importance of these effects on efforts to develop electronic and photonic applications of SC-SWNTs.
单壁碳纳米管 (SWNT) 薄膜为电子和光子器件的发展提供了一个独特的平台,因为它们结合了单个 SWNTs 的优异物理性质和大面积薄膜制造及图案化技术的能力。基于柔性 SWNT 薄膜的场效应晶体管、传感器、探测器、光伏电池和发光二极管已经得到了展示,而用于大面积显示器和智能窗户的 SWNT 薄膜透明、导电涂层也正在开发中。虽然手性纯 SWNTs 尚未商业化,但半导体 (SC) 和金属 (MT) SWNTs 的商业化已经为应用的发展提供了便利,因为它们提供了具有一致电子结构的材料。然而,分离的 SWNTs 网络的电输运性质不如单个 SWNTs。特别是对于本报告所涉及的半导体 SWNTs,其电输运性质与传统半导体的行为有很大的不同:例如,锗的带隙 (E = 0.66 eV) 与直径为 1.5nm 的 SC-SWNTs 的带隙大致匹配,但在 300-100 K 的范围内,锗中的本征载流子浓度下降了 10 个数量级以上,而典型的 SC-SWNT 网络的电导率下降不到 4 倍。显然,这种电导率的弱调制阻碍了 SC-SWNT 薄膜作为场效应晶体管和光电探测器的应用,本报告的目的是分析导致此类网络电导率对温度的依赖性异常弱的电输运机制。评估了残余 MT-SWNTs 贡献以及 SWNTs 分离和掺杂不完善等外在因素的影响。然而,观察到的电导率随温度的变化表明,半导体 SWNTs 中存在带隙中的本征电子态,这些电子态提供了低能激发源,可以通过波动诱导的隧道穿过纳米管之间的结来贡献到纳米管上的跳跃电导,这些一起主导了低温输运并限制了薄膜的电阻率。在高温下,像传统半导体一样,本征载流子通过带隙热激活,可用于带输运。带隙中的本征载流子被中间隙态钉扎在带隙中间,其起源归因于 SWNT 壁上的缺陷。这种中间隙态已在与扫描隧道谱实验、低温电测量中的库仑阻塞观察、选择性电化学沉积成像、尖端增强拉曼光谱、高分辨率光电流光谱以及与各种缺陷相关的电子态密度建模有关的报告中被报道。中间隙态存在于传统半导体中,但在本报告的上下文中,它们对半导体 SWNT 网络的电子输运的贡献程度是不寻常的。在本报告中,我们将重点放在 SC-SWNTs 中的中间隙态上,研究它们对 SC-SWNT 网络电子性质的影响,以及这些影响对开发 SC-SWNT 电子和光子应用的重要性。