Muñoz R, Munuera C, Martínez J I, Azpeitia J, Gómez-Aleixandre C, García-Hernández M
Instituto de Ciencia de Materiales de Madrid, CSIC Madrid, 28049, Spain.
2d Mater. 2017 Mar;4(1). doi: 10.1088/2053-1583/4/1/015009. Epub 2016 Nov 3.
Direct growth of graphene films on dielectric substrates (quartz and silica) is reported, by means of remote electron cyclotron resonance plasma assisted chemical vapor deposition r-(ECR-CVD) at low temperature (650°C). Using a two step deposition process- nucleation and growth- by changing the partial pressure of the gas precursors at constant temperature, mostly monolayer continuous films, with grain sizes up to 500 nm are grown, exhibiting transmittance larger than 92% and sheet resistance as low as 900 Ω·sq. The grain size and nucleation density of the resulting graphene sheets can be controlled varying the deposition time and pressure. In additon, first-principles DFT-based calculations have been carried out in order to rationalize the oxygen reduction in the quartz surface experimentally observed. This method is easily scalable and avoids damaging and expensive transfer steps of graphene films, improving compatibility with current fabrication technologies.
报道了通过远程电子回旋共振等离子体辅助化学气相沉积r-(ECR-CVD)在低温(650°C)下在介电衬底(石英和二氧化硅)上直接生长石墨烯薄膜的方法。采用两步沉积工艺——成核和生长——通过在恒定温度下改变气体前驱体的分压,生长出大多为单层连续薄膜,晶粒尺寸可达500 nm,其透光率大于92%,方块电阻低至900 Ω·sq。通过改变沉积时间和压力,可以控制所得石墨烯片的晶粒尺寸和成核密度。此外,为了合理解释实验观察到的石英表面的氧还原现象,进行了基于第一性原理密度泛函理论(DFT)的计算。该方法易于扩展,避免了石墨烯薄膜的损伤和昂贵的转移步骤,提高了与当前制造技术的兼容性。