Huang Nantian, Qi Jiajin, Li Fuqing, Yang Dongfeng, Cai Guowei, Huang Guilin, Zheng Jian, Li Zhenxin
School of Electrical Engineering, Northeast Electric Power University, Jilin 132012, China.
Hangzhou Municipal Electric Power Supply Company of State Grid, Hangzhou 310009, China.
Sensors (Basel). 2017 Sep 16;17(9):2133. doi: 10.3390/s17092133.
In order to improve the classification accuracy of recognizing short-circuit faults in electric transmission lines, a novel detection and diagnosis method based on empirical wavelet transform (EWT) and local energy (LE) is proposed. First, EWT is used to deal with the original short-circuit fault signals from photoelectric voltage transformers, before the amplitude modulated-frequency modulated (AM-FM) mode with a compactly supported Fourier spectrum is extracted. Subsequently, the fault occurrence time is detected according to the modulus maxima of intrinsic mode function (IMF₂) from three-phase voltage signals processed by EWT. After this process, the feature vectors are constructed by calculating the LE of the fundamental frequency based on the three-phase voltage signals of one period after the fault occurred. Finally, the classifier based on support vector machine (SVM) which was constructed with the LE feature vectors is used to classify 10 types of short-circuit fault signals. Compared with complementary ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and improved CEEMDAN methods, the new method using EWT has a better ability to present the frequency in time. The difference in the characteristics of the energy distribution in the time domain between different types of short-circuit faults can be presented by the feature vectors of LE. Together, simulation and real signals experiment demonstrate the validity and effectiveness of the new approach.
为提高输电线路短路故障识别的分类准确率,提出一种基于经验小波变换(EWT)和局部能量(LE)的新型检测与诊断方法。首先,利用EWT对来自光电电压互感器的原始短路故障信号进行处理,提取具有紧支集傅里叶谱的调幅调频(AM - FM)模式。随后,根据EWT处理后的三相电压信号的本征模函数(IMF₂)的模极大值检测故障发生时间。在此过程之后,基于故障发生后一个周期的三相电压信号,通过计算基频的局部能量构建特征向量。最后,利用基于支持向量机(SVM)且由局部能量特征向量构建的分类器对10种短路故障信号进行分类。与自适应噪声互补总体经验模态分解(CEEMDAN)和改进的CEEMDAN方法相比,采用EWT的新方法具有更好的频率实时呈现能力。局部能量的特征向量能够呈现不同类型短路故障在时域能量分布特征上的差异。仿真和实际信号实验共同证明了该新方法的有效性。