1 Department of Biomedical Engineering, University of Michigan , Ann Arbor, Michigan.
2 Department of Chemical Engineering, University of Michigan , Ann Arbor, Michigan.
Tissue Eng Part C Methods. 2018 Jan;24(1):32-41. doi: 10.1089/ten.TEC.2017.0316. Epub 2017 Nov 6.
Skeletal muscle satellite cells have tremendous therapeutic potential in cell therapy or skeletal muscle tissue engineering. Obtaining a sufficiently pure satellite cell population, however, presents a significant challenge. We hypothesized that size differences between satellite cells and fibroblasts, two primary cell types obtained from skeletal muscle dissociation, would allow for label-free, inertial separation in a microfluidic device, termed a "Labyrinth," and that these purified satellite cells could be used to engineer skeletal muscle. Throughout tissue fabrication, Labyrinth-purified cells were compared with unsorted controls to assess the efficiency of this novel sorting process and to examine potential improvements in myogenic proliferation, differentiation, and tissue function. Immediately after dissociation and Labyrinth sorting, cells were immunostained to identify myogenic cells and fibroblast progenitors. Remaining cells were cultured for 14 days to form a confluent monolayer that was induced to delaminate and was captured as a 3D skeletal muscle construct. During monolayer development, myogenic proliferation (BrdU assay on Day 4), differentiation and myotube fusion index (α-actinin on Day 11), and myotube structural development (light microscopy on Day 14) were assessed. Isometric tetanic force production was measured in 3D constructs on Day 16. Immediately following sorting, unsorted cells exhibited a myogenic purity of 39.9% ± 3.99%, and this purity was enriched approximately two-fold to 75.5% ± 1.59% by microfluidic separation. The BrdU assay on Day 4 similarly showed significantly enhanced myogenic proliferation: in unsorted controls 47.0% ± 2.77% of proliferating cells were myogenic, in comparison to 61.7% ± 2.55% following purification. Myogenic differentiation and fusion, assessed by fusion index quantification, showed improvement from 82.7% ± 3.74% in control to 92.3% ± 2.04% in the purified cell population. Myotube density in unsorted controls, 18.6 ± 3.26 myotubes/mm, was significantly enriched in the purified cell population to 33.9 ± 3.74 myotubes/mm. Constructs fabricated from Labyrinth-purified cells also produced significantly greater tetanic forces (143.6 ± 16.9 μN) than unsorted controls (70.7 ± 8.03 μN). These results demonstrate the promise of microfluidic sorting in purifying isolated satellite cells. This unique technology could assist researchers in translating the regenerative potential of satellite cells to cell therapies and engineered tissues.
骨骼肌卫星细胞在细胞治疗或骨骼肌组织工程中具有巨大的治疗潜力。然而,获得足够纯度的卫星细胞群体是一个巨大的挑战。我们假设,从骨骼肌分离获得的两种主要细胞类型——卫星细胞和成纤维细胞之间的大小差异,可以在一种称为“迷宫”的微流控装置中实现无标记、惯性分离,并且这些纯化的卫星细胞可用于构建骨骼肌。在整个组织制造过程中,将 Labyrinth 纯化的细胞与未分选的对照进行比较,以评估这种新型分选过程的效率,并检查肌生成增殖、分化和组织功能的潜在改善。在解离和 Labyrinth 分选后立即对细胞进行免疫染色,以鉴定肌细胞和成纤维细胞前体。其余细胞培养 14 天以形成一个连续的单层,然后诱导其分层,并作为 3D 骨骼肌构建体捕获。在单层发育过程中,评估肌生成增殖(第 4 天 BrdU 测定)、分化和肌管融合指数(第 11 天α-肌动蛋白)以及肌管结构发育(第 14 天明场显微镜)。第 16 天测量 3D 构建体的等长强直力产生。分选后立即,未分选的细胞显示出 39.9%±3.99%的肌源性纯度,通过微流分离将这种纯度富集约两倍至 75.5%±1.59%。第 4 天的 BrdU 测定同样显示出显著增强的肌生成增殖:在未分选的对照中,47.0%±2.77%的增殖细胞为肌源性,而在纯化后为 61.7%±2.55%。通过融合指数定量评估的肌生成分化和融合显示出从对照组 82.7%±3.74%的改善到纯化细胞群中的 92.3%±2.04%。未分选对照中的肌管密度为 18.6±3.26 个肌管/mm,在纯化细胞群中显著富集至 33.9±3.74 个肌管/mm。由 Labyrinth 纯化的细胞制成的构建体也产生了显著更大的强直力(143.6±16.9 μN)比未分选的对照(70.7±8.03 μN)。这些结果表明微流控分选在纯化分离的卫星细胞方面具有很大的潜力。这项独特的技术可以帮助研究人员将卫星细胞的再生潜力转化为细胞治疗和工程组织。