Suppr超能文献

短期吸入镀锌钢电阻点焊过程中产生的烟雾后大鼠的气溶胶特征和肺部反应

Aerosol characterization and pulmonary responses in rats after short-term inhalation of fumes generated during resistance spot welding of galvanized steel.

作者信息

Antonini James M, Afshari Aliakbar, Meighan Terence G, McKinney Walter, Jackson Mark, Schwegler-Berry Diane, Burns Dru A, LeBouf Ryan F, Chen Bean T, Shoeb Mohammad, Zeidler-Erdely Patti C

机构信息

Health Effects Laboratory Division, National Institute for Occupational Safety and Health, Morgantown, WV, USA.

Respiratory Health Division, National Institute for Occupational Safety and Health, Morgantown, WV, USA.

出版信息

Toxicol Rep. 2017 Feb 22;4:123-133. doi: 10.1016/j.toxrep.2017.02.004. eCollection 2017.

Abstract

Resistance spot welding is a common process to join metals in the automotive industry. Adhesives are often used as sealers to seams of metals that are joined. Anti-spatter compounds sometimes are sprayed onto metals to be welded to improve the weldability. Spot welding produces complex aerosols composed of metal and volatile compounds (VOCs) which can cause lung disease in workers. Male Sprague-Dawley rats (n = 12/treatment group) were exposed by inhalation to 25 mg/m of aerosol for 4 h/day × 8 days during spot welding of galvanized zinc (Zn)-coated steel in the presence or absence of a glue or anti-spatter spray. Controls were exposed to filtered air. Particle size distribution and chemical composition of the generated aerosol were determined. At 1 and 7 days after exposure, bronchoalveolar lavage (BAL) was performed to assess lung toxicity. The generated particles mostly were in the submicron size range with a significant number of nanometer-sized particles formed. The primary metals present in the fumes were Fe (72.5%) and Zn (26.3%). The addition of the anti-spatter spray and glue did affect particle size distribution when spot welding galvanized steel, whereas they had no effect on metal composition. Multiple VOCs (e.g., methyl methacrylate, acetaldehyde, ethanol, acetone, benzene, xylene) were identified when spot welding using either the glue or the anti-spatter spray that were not present when welding alone. Markers of lung injury (BAL lactate dehydrogenase) and inflammation (total BAL cells/neutrophils and cytokines/chemokines) were significantly elevated compared to controls 1 day after exposure to the spot welding fumes. The elevated pulmonary response was transient as lung toxicity mostly returned to control values by 7 days. The VOCs or the concentrations that they were generated during the animal exposures had no measurable effect on the pulmonary responses. Inhalation of galvanized spot welding fumes caused acute lung toxicity most likely due to the short-term exposure of particles that contain Zn.

摘要

电阻点焊是汽车工业中连接金属的常用工艺。粘合剂常被用作连接金属接缝处的密封剂。有时会在待焊接的金属上喷涂防溅剂以提高可焊性。点焊会产生由金属和挥发性化合物(VOCs)组成的复杂气溶胶,这可能会导致工人患肺病。在有或没有胶水或防溅剂喷雾的情况下,对雄性Sprague-Dawley大鼠(每组n = 12)进行吸入暴露,使其在镀锌锌(Zn)涂层钢的点焊过程中每天暴露于25 mg/m³的气溶胶中4小时,共8天。对照组暴露于过滤空气中。测定所产生气溶胶的粒径分布和化学成分。在暴露后1天和7天,进行支气管肺泡灌洗(BAL)以评估肺毒性。所产生的颗粒大多在亚微米尺寸范围内,形成了大量纳米级颗粒。烟雾中存在的主要金属是铁(72.5%)和锌(26.3%)。在点焊镀锌钢时,添加防溅剂喷雾和胶水确实会影响粒径分布,而对金属成分没有影响。在使用胶水或防溅剂喷雾进行点焊时,鉴定出了多种VOCs(如甲基丙烯酸甲酯、乙醛、乙醇、丙酮、苯、二甲苯),而单独焊接时不存在这些物质。与暴露于点焊烟雾1天后的对照组相比,肺损伤标志物(BAL乳酸脱氢酶)和炎症标志物(总BAL细胞/中性粒细胞以及细胞因子/趋化因子)显著升高。肺部反应的升高是短暂的,因为到7天时肺毒性大多恢复到对照值。动物暴露期间产生的VOCs或其浓度对肺部反应没有可测量的影响。吸入镀锌点焊烟雾最有可能由于短期暴露于含锌颗粒而导致急性肺毒性。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/a3cf/5615112/eaabee14225e/fx1.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验