a Dept. of Optics and Optometry and Visual Sciences , University of Valencia , Spain.
b Surgery Department , Fernández-Vega Ophthalmological Institute , Oviedo , Spain.
Expert Rev Med Devices. 2018 Jun;15(6):453-459. doi: 10.1080/17434440.2018.1481745. Epub 2018 Jun 5.
Current advances in ocular surgery require the evaluation of differences in automated white-to-white (WTW) measurements between systems. We aim to analyze three different commonly used devices in clinical practice: the IOLMaster 700, the Atlas 9000, and the Sirius.
Ninety right eyes of ninety healthy subjects were included. Measurements of WTW distances were taken with each device for all subjects in the same session and by the same observer. Statistical comparison was carried out by means of the rANOVA procedure and the Bonferroni post-hoc test. In addition, the Bland-Altman analysis was applied in order to perform pairwise comparisons.
Average WTW values obtained by the IOLMaster 700, the Atlas 9000, and the Sirius devices were 12.18 ± 0.40-mm, 12.32 ± 0.37-mm and 11.90 ± 0.37-mm, respectively. There were statistically significant differences in all pairwise comparisons. Mean differences revealed that the Atlas 9000 provided the highest WTW values, followed by the IOLMaster 700 values and finally by the Sirius results, which had the lowest values. The limits of agreement obtained in all pairwise comparisons were wide, with a range between 0.64 and 0.75 mm.
According to our results, these three devices should not be used interchangeably for WTW diameter measurements during the clinical practice.
目前眼科学领域的进展需要评估不同系统间自动白到白(WTW)测量的差异。我们旨在分析三种在临床实践中常用的不同设备:IOLMaster 700、Atlas 9000 和 Sirius。
纳入 90 例 90 只健康受试者的右眼。所有受试者均在同一次检查中由同一位观察者使用每台设备进行 WTW 距离测量。通过 rANOVA 程序和 Bonferroni 事后检验进行统计学比较。此外,还应用 Bland-Altman 分析进行两两比较。
IOLMaster 700、Atlas 9000 和 Sirius 设备获得的平均 WTW 值分别为 12.18±0.40mm、12.32±0.37mm 和 11.90±0.37mm。所有两两比较均存在统计学差异。平均差值表明,Atlas 9000 提供的 WTW 值最高,其次是 IOLMaster 700 值,最后是 Sirius 结果,其值最低。所有两两比较的一致性界限均较宽,范围在 0.64 至 0.75mm 之间。
根据我们的结果,在临床实践中,这三种设备不应互换用于 WTW 直径测量。