Larsen Naomi, Oberbeck Katharina, Lima de Miranda Rodrigo, Trentmann Jens, Madjidyar Jawid, Quandt Eckhard, Jansen Olav
Department of Radiology and Neuroradiology, University Hospital Schleswig-Holstein, Kiel, Germany.
Acquandas GmbH, Acquandas GmbH, Kiel, Germany.
Rofo. 2018 Nov;190(11):1053-1058. doi: 10.1055/a-0631-4118. Epub 2018 Jun 18.
Various stent retrievers differing in stent design and mechanical properties are currently available for the treatment of ischemic stroke. We conducted this in vitro study to compare the efficacy, embolism rate, and safety of commercially available stent retrievers and prototypes.
Whole blood thrombi were produced in a Chandler loop. The thrombi were inserted into the curved M1 segment of a silicone model of the anterior cerebral circulation. Thrombectomy maneuvers were performed with six commercially available stent retrievers and 2 prototypes with different strut thickness. Wall-stent apposition, first pass recanalization rate, retraction force, and embolism rate were compared.
Devices with complete wall-stent apposition had the highest first pass recanalization rate and lowest embolism rate, but showed the highest retraction force. The prototype with thinner struts had a comparable recanalization and embolism rate, while a lower retraction force had to be applied compared to the prototype with thicker struts.
Complete wall-stent apposition facilitates a higher recanalization rate and lower embolism rate but also correlates to a higher necessary retraction force and thus possibly higher risk of endothelium damage. Stent modifications leading to a reduced retraction force do not compromise efficacy and embolism rate.
· Complete wall-stent apposition facilitates an effective thrombectomy. · Complete wall-stent apposition leads to higher retraction force and possibly greater endothelium damage. · Modifications of strut thickness do not compromise recanalization and embolism rate. · Thinner struts correlate with a lower retraction force.
· Larsen N, Oberbeck K, Lima de Miranda R et al. Comparison of Efficacy, Embolism Rate and Safety of Thrombectomy with Stent Retrievers in an Anterior Circulation Stroke Model. Fortschr Röntgenstr 2018; 190: 1053 - 1058.
目前有多种支架取栓器,其支架设计和机械性能各不相同,可用于治疗缺血性卒中。我们进行了这项体外研究,以比较市售支架取栓器和原型产品的疗效、栓塞率及安全性。
在钱德勒环路中制备全血血栓。将血栓插入大脑前循环硅胶模型的弯曲M1段。使用6种市售支架取栓器和2种具有不同支柱厚度的原型产品进行取栓操作。比较壁-支架贴合情况、首次通过再通率、回撤力和栓塞率。
壁-支架完全贴合的器械首次通过再通率最高,栓塞率最低,但回撤力最高。支柱较薄的原型产品再通率和栓塞率与之相当,但与支柱较厚的原型产品相比,所需的回撤力更低。
壁-支架完全贴合有助于提高再通率和降低栓塞率,但也与更高的必要回撤力相关,因此可能导致更高的内皮损伤风险。导致回撤力降低的支架改良不会影响疗效和栓塞率。
·壁-支架完全贴合有助于进行有效的取栓操作。·壁-支架完全贴合会导致更高的回撤力,并可能造成更大的内皮损伤。·支柱厚度的改良不会影响再通率和栓塞率。·较薄的支柱与较低的回撤力相关。
· Larsen N, Oberbeck K, Lima de Miranda R等。前循环卒中模型中使用支架取栓器进行取栓的疗效、栓塞率和安全性比较。Fortschr Röntgenstr 2018; 190: 1053 - 1058。