Plant Research Department, Nuclear Research Center, Atomic Energy Authority of Egypt, Cairo, Egypt.
Department of Botany and Microbiology, Faculty of Science, Zagazig University, Zagazig, Egypt.
Appl Microbiol Biotechnol. 2019 Nov;103(21-22):8923-8935. doi: 10.1007/s00253-019-10129-1. Epub 2019 Sep 14.
UV and gamma irradiation mutagenesis was applied on Aspergillus fumigatus and Alternaria tenuissima in order to improve their producing ability of paclitaxel. Among the screened mutants, two stable strains (designated TXD105-GM6 and TER995-GM3) showed the maximum paclitaxel production. Paclitaxel titers of the two respective mutants were dramatically intensified to 1.22- and 1.24-fold, as compared by their respective parents. Immobilization using five different entrapment carriers of calcium alginate, agar-agar, Na-CMC, gelatin, and Arabic gum was successfully applied for production enhancement of paclitaxel by the two mutants. The immobilized cultures were superior to free-cell cultures and paclitaxel production by the immobilized mycelia was much higher than that of the immobilized spores using all the tried carriers. Moreover, calcium alginate gel beads were found the most conductive and proper entrapment carrier for maximum production of paclitaxel. The feasibility of the paclitaxel production by the immobilized mycelia as affected by incubation period, medium volume, and number of beads per flask was adopted. Under the favorable immobilization conditions, the paclitaxel titers were significantly intensified to 1.31- and 1.88-fold by the respective mutants, as compared by their free cultures. The obtained paclitaxel titers by the immobilized mycelia of the respective mutants (694.67 and 388.65 μg L) were found promising in terms of fungal production of paclitaxel. Hence, these findings indicate the future possibility to reduce the cost of producing paclitaxel and suggest application of the immobilization technique for the biotechnological production of paclitaxel at an industrial scale.
紫外线和伽马射线诱变应用于烟曲霉和细极链格孢菌,以提高它们生产紫杉醇的能力。在所筛选的突变体中,两个稳定的菌株(分别命名为 TXD105-GM6 和 TER995-GM3)表现出最高的紫杉醇产量。与各自的亲本相比,两个突变体的紫杉醇产量分别显著提高了 1.22 倍和 1.24 倍。采用海藻酸钠、琼脂、Na-CMC、明胶和阿拉伯树胶五种不同的包埋载体对两个突变体进行了固定化生产紫杉醇的研究。固定化培养优于游离细胞培养,并且所有尝试的载体都显示出固定化菌丝体的紫杉醇产量明显高于固定化孢子。此外,海藻酸钠凝胶珠被发现是最适合和有效的包埋载体,可用于最大程度地生产紫杉醇。采用固定化菌丝体生产紫杉醇的可行性受孵育期、培养基体积和每瓶珠数的影响。在有利的固定化条件下,与游离培养相比,两个突变体的紫杉醇产量分别显著提高了 1.31 倍和 1.88 倍。两个突变体的固定化菌丝体获得的紫杉醇产量(694.67 和 388.65μg/L)在真菌生产紫杉醇方面具有很大的潜力。因此,这些发现表明未来有可能降低紫杉醇的生产成本,并建议在工业规模上应用固定化技术进行紫杉醇的生物技术生产。