Goel V K, Clark C R, Gallaes K, Liu Y K
Department of Biomedical Engineering, University of Iowa, Iowa City 52242.
J Biomech. 1988;21(8):673-80. doi: 10.1016/0021-9290(88)90204-7.
The relationships between applied pure moments at the occiput (C0) and the resulting rotations at the atlanto-occipital (C0-C1) and atlanto-axial (C1-C2) joints are quantified. In axial twist, with a moment of 0.3 Nm, a mean rotation of about 2.5 degrees and 23.3 degrees was observed at C0-C1 and C1-C2 units respectively. Both the atlas and axis contributed to produce lateral bending motion. The ratio between extension and flexion rotations at C0-C1 was 2.5:1. Lateral bending and axial rotations were strongly coupled to each other. The occipito-atlanto-axial complex exhibited a large 'neutral zone' compared to lower cervical spine segments. The likely clinical significance of these findings are discussed.
对枕骨(C0)施加的纯力矩与寰枕(C0-C1)和寰枢(C1-C2)关节产生的旋转之间的关系进行了量化。在轴向扭转中,力矩为0.3 Nm时,在C0-C1和C1-C2单元分别观察到平均约2.5度和23.3度的旋转。寰椎和枢椎都对产生侧屈运动有贡献。C0-C1处伸展与屈曲旋转的比例为2.5:1。侧屈和轴向旋转彼此强烈耦合。与下颈椎节段相比,枕寰枢复合体表现出较大的“中性区”。讨论了这些发现可能的临床意义。