ACRF Image X Institute, The University of Sydney, Sydney, NSW, Australia. Author to whom any correspondence should be addressed.
Phys Med Biol. 2020 Jan 17;65(2):025008. doi: 10.1088/1361-6560/ab5d8b.
The ability to track tumour motion without implanted markers on a standard linear accelerator (linac) could enable wide access to real-time adaptive radiotherapy for cancer patients. We previously have retrospectively validated a method for 3D markerless target tracking using intra-fractional kilovoltage (kV) projections acquired on a standard linac. This paper presents the first prospective implementation of markerless lung target tracking on a standard linac and its quality assurance (QA) procedure. The workflow and the algorithm developed to track the 3D target position during volumetric modulated arc therapy treatment delivery were optimised. The linac was operated in clinical QA mode, while kV projections were streamed to a dedicated computer using a frame-grabber software. The markerless target tracking accuracy and precision were measured in a lung phantom experiment under the following conditions: static localisation of seven distinct positions, dynamic localisation of five patient-measured motion traces, and dynamic localisation with treatment interruption. The QA guidelines were developed following the AAPM Task Group 147 report with the requirement that the tracking margin components, the margins required to account for tracking errors, did not exceed 5 mm in any direction. The mean tracking error ranged from 0.0 to 0.9 mm (left-right), -0.6 to -0.1 mm (superior-inferior) and -0.7 to 0.1 mm (anterior-posterior) over the three tests. Larger errors were found in cases with large left-right or anterior-posterior and small superior-inferior motion. The tracking margin components did not exceed 5 mm in any direction and ranged from 0.4 to 3.2 mm (left-right), 0.7 to 1.6 mm (superior-inferior) and 0.8 to 1.5 mm (anterior-posterior). This study presents the first prospective implementation of markerless lung target tracking on a standard linac and provides a QA procedure for its safe clinical implementation, potentially enabling real-time adaptive radiotherapy for a large population of lung cancer patients.
在标准线性加速器(linac)上不使用植入标记物跟踪肿瘤运动的能力可以使癌症患者广泛获得实时自适应放射治疗。我们之前已经回顾性验证了一种使用标准 linac 上获取的分次千伏(kV)投影进行 3D 无标记目标跟踪的方法。本文介绍了首次在标准 linac 上进行无标记肺目标跟踪的前瞻性实施及其质量保证(QA)程序。优化了用于在容积调制弧形治疗过程中跟踪 3D 目标位置的工作流程和开发的算法。linac 在临床 QA 模式下运行,同时使用帧抓取器软件将 kV 投影流式传输到专用计算机。在以下条件下,在肺体模实验中测量了无标记目标跟踪的准确性和精密度:七个不同位置的静态定位,五个患者测量运动轨迹的动态定位,以及带治疗中断的动态定位。根据 AAPM 工作组 147 报告制定了 QA 指南,要求跟踪误差,即跟踪误差的允许范围,在任何方向上都不超过 5mm。在这三项测试中,平均跟踪误差范围为 0.0 至 0.9mm(左右),-0.6 至-0.1mm(上下)和-0.7 至 0.1mm(前后)。在左右方向或前后方向较大而上下方向较小的情况下,发现较大的误差。在任何方向上,跟踪误差范围都不超过 5mm,左右方向为 0.4 至 3.2mm,上下方向为 0.7 至 1.6mm,前后方向为 0.8 至 1.5mm。本研究首次在标准 linac 上进行了无标记肺目标跟踪的前瞻性实施,并提供了其安全临床实施的 QA 程序,有可能为大量肺癌患者实现实时自适应放射治疗。