Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, NY, 10065, USA.
Yale University, New Haven, CT, 06520, USA.
Med Phys. 2018 Dec;45(12):5555-5563. doi: 10.1002/mp.13259. Epub 2018 Nov 13.
Localizing lung tumors during treatment delivery is critical for managing respiratory motion, ensuring tumor coverage, and reducing toxicities. The purpose of this project is to develop a real-time system that performs markerless tracking of lung tumors using simultaneously acquired MV and kV images during radiotherapy of lung cancer with volumetric modulated arc therapy.
Continuous MV/kV images were simultaneously acquired during dose delivery. In the subsequent analysis, a gantry angle-specific region of interest was defined according to the treatment aperture. After removing imaging artifacts, processed MV/kV images were directly registered to the corresponding daily setup cone-beam CT (CBCT) projections that served as reference images. The registration objective function consisted of a sum of normalized cross-correlation, weighted by the contrast-to-noise ratio of each MV and kV image. The calculated 3D shifts of the tumor were corrected by the displacements between the CBCT projections and the planning respiratory correlated CT (RCCT) to generate motion traces referred to a specific respiratory phase. The accuracy of the algorithm was evaluated on both anthropomorphic phantom and patient studies. The phantom consisted of localizing a 3D printed tumor, embedded in a thorax phantom, in an arc delivery. In an IRB-approved study, data were obtained from VMAT treatments of two lung cancer patients with three electromagnetic (Calypso) beacon transponders implanted in airways near the lung tumor.
In the phantom study, the root mean square error (RMSE) between the registered and actual (programmed couch movement) target position was 1.2 mm measured by the MV/kV imaging system, which was smaller compared to the MV or kV alone, of 4.1 and 1.3 mm, respectively. In the patient study, the mean and standard deviation discrepancy between electromagnetic-based tumor position and the MV/KV-markerless approach was -0.2 ± 0.6 mm, 0.2 ± 1.0 mm, and -1.2 ± 1.5 mm along the superior-inferior, anterior-posterior, and left-right directions, respectively; resulting in a 3D displacement discrepancy of 2.0 ± 1.1 mm. Poor contrast around the tumor was the main contribution to registration uncertainties.
The combined MV/kV imaging system can provide real-time 3D localization of lung tumor, with comparable accuracy to the electromagnetic-based system when features of tumors are detectable. Careful design of a registration algorithm and a VMAT plan that maximizes the tumor visibility are key elements for a successful MV/KV localization strategy.
在治疗过程中定位肺部肿瘤对于管理呼吸运动、确保肿瘤覆盖范围和降低毒性至关重要。本项目的目的是开发一种实时系统,该系统使用容积调强弧形治疗(VMAT)治疗肺癌时同时获取的 MV 和千伏 X 射线图像,对肺部肿瘤进行无标记跟踪。
在剂量输送过程中同时连续获取 MV/kV 图像。在后续分析中,根据治疗孔径定义特定于龙门角度的感兴趣区域。去除成像伪影后,处理后的 MV/kV 图像直接与作为参考图像的每日设置锥形束 CT(CBCT)投影进行配准。配准目标函数由归一化互相关的总和组成,该总和由每个 MV 和 kV 图像的对比度噪声比加权。通过 CBCT 投影与计划呼吸相关 CT(RCCT)之间的位移校正计算出的肿瘤 3D 位移,以生成参考特定呼吸相位的运动轨迹。在人体模型和患者研究中评估了算法的准确性。该模型由一个嵌入在胸部模型中的 3D 打印肿瘤组成,该肿瘤在弧形输送中进行定位。在一项经过机构审查委员会批准的研究中,从两名肺癌患者的 VMAT 治疗中获得了数据,这两名患者在靠近肺部肿瘤的气道中植入了三个电磁(Calypso)信标转发器。
在人体模型研究中,通过 MV/kV 成像系统测量,注册和实际(程控床移动)目标位置之间的均方根误差(RMSE)为 1.2mm,小于 MV 或 kV 单独测量的 4.1mm 和 1.3mm。在患者研究中,电磁肿瘤位置与 MV/KV 无标记方法之间的平均和标准偏差差异分别为 -0.2±0.6mm、-0.2±1.0mm 和-1.2±1.5mm,沿上下、前后和左右方向;导致 3D 位移差异为 2.0±1.1mm。肿瘤周围对比度差是导致配准不确定性的主要因素。
当肿瘤特征可检测时,组合的 MV/kV 成像系统可以提供实时 3D 肺部肿瘤定位,其准确性可与电磁系统相媲美。精心设计注册算法和最大限度提高肿瘤可见度的 VMAT 计划是成功的 MV/KV 定位策略的关键要素。