Center for Nanoscale Materials, Argonne National Laboratory, Lemont, Illinois 60439, United States.
Pritzker School of Molecular Engineering, University of Chicago, Chicago, Illinois 60637, United States.
ACS Nano. 2020 May 26;14(5):6339-6347. doi: 10.1021/acsnano.0c03252. Epub 2020 Apr 24.
The emergence of a pandemic affecting the respiratory system can result in a significant demand for face masks. This includes the use of cloth masks by large sections of the public, as can be seen during the current global spread of COVID-19. However, there is limited knowledge available on the performance of various commonly available fabrics used in cloth masks. Importantly, there is a need to evaluate filtration efficiencies as a function of aerosol particulate sizes in the 10 nm to 10 μm range, which is particularly relevant for respiratory virus transmission. We have carried out these studies for several common fabrics including cotton, silk, chiffon, flannel, various synthetics, and their combinations. Although the filtration efficiencies for various fabrics when a single layer was used ranged from 5 to 80% and 5 to 95% for particle sizes of <300 nm and >300 nm, respectively, the efficiencies improved when multiple layers were used and when using a specific combination of different fabrics. Filtration efficiencies of the hybrids (such as cotton-silk, cotton-chiffon, cotton-flannel) was >80% (for particles <300 nm) and >90% (for particles >300 nm). We speculate that the enhanced performance of the hybrids is likely due to the combined effect of mechanical and electrostatic-based filtration. Cotton, the most widely used material for cloth masks performs better at higher weave densities (, thread count) and can make a significant difference in filtration efficiencies. Our studies also imply that gaps (as caused by an improper fit of the mask) can result in over a 60% decrease in the filtration efficiency, implying the need for future cloth mask design studies to take into account issues of "fit" and leakage, while allowing the exhaled air to vent efficiently. Overall, we find that combinations of various commonly available fabrics used in cloth masks can potentially provide significant protection against the transmission of aerosol particles.
呼吸系统传染病大流行时会对面罩的需求产生重大影响。这包括公众大量使用布制口罩,例如当前 COVID-19 在全球范围内传播期间。然而,人们对面罩中常用各种面料的性能了解有限。重要的是,需要评估过滤效率作为气溶胶颗粒在 10nm 到 10μm 范围内的尺寸的函数,这对于呼吸道病毒传播特别相关。我们已经对几种常见的面料进行了这些研究,包括棉、丝、雪纺、绒布、各种合成纤维及其组合。尽管当使用单层时,各种面料的过滤效率范围在 5%到 80%之间,对于 <300nm 的颗粒和 >300nm 的颗粒分别为 5%到 95%,但当使用多层或不同面料的特定组合时,效率会提高。混合面料(如棉丝、棉雪纺、棉绒布)的过滤效率>80%(<300nm 颗粒)和>90%(>300nm 颗粒)。我们推测,混合面料性能的提高可能是由于机械和基于静电的过滤的综合作用。棉是布制口罩最常用的材料,在较高的织物密度(线数)下表现更好,可以显著提高过滤效率。我们的研究还表明,口罩贴合不当造成的缝隙会导致过滤效率降低 60%以上,这意味着未来的布制口罩设计研究需要考虑“贴合”和泄漏问题,同时要让呼出的空气有效排出。总体而言,我们发现布制口罩中常用各种面料的组合可能为气溶胶颗粒的传播提供显著的保护。