Khanra Anwesha, Vasistha Shrasti, Kumar Prabhanshu, Rai Monika Prakash
Amity Institute of Biotechnology, Amity University Uttar Pradesh, Sector-125, Noida, 201313 Uttar Pradesh India.
3 Biotech. 2020 Aug;10(8):331. doi: 10.1007/s13205-020-02323-0. Epub 2020 Jul 5.
Present study aimed to evaluate the influence of carbon/nitrogen ratio (C/N) on mixotrophic growth of microalgae and role of nanomaterial in cell recovery and lipid improvement. In this study, three microalgae species were isolated, screened from local freshwater body for lipid assimilation. The microalgae were identified as and Mixotrophic cultivation of each microalgae strain using various organic carbon sources was preferred in contrast with photoautotrophic mode. Sucrose represented as the preeminent source for enhancing the microalgae biomass of 3.5 g/L and lipid content of 58.35%, which was a significant improvement as compared to control. Later, response surface methodology-central composite design (RSM-CCD), tool was employed to optimize the C/N ratio and demonstrated the maximum biomass production of 5.02 g/L along with the increased lipid content of 60.34%. Ti nanoparticles (Ti nps) were added to the culture for lipid enhancement in the stationary phase and biomass removal was performed by nanoparticle (np)-mediated flocculation technique. Optimized concentration of 15 ppm Ti nps determined the cell harvesting efficacy of 82.46% during 45 min of sedimentation time and 1.23-fold lipid enhancement was reported. Extracted lipid was converted to fatty acid methyl esters (FAME) by the process of transesterification and analyzed by gas chromatography-mass spectrometry (GC-MS). Characterization of FAME revealed the presence of 56.31% of saturated fatty acid (SFA) and 29.06% unsaturated fatty acids (UFA) that could be processed towards sustainable biodiesel production. Hence, our results suggested that integration of mixotrophic cultivation and Ti nps emerged as a new cost-effective approach for biomass and lipid enhancement in microalgae
本研究旨在评估碳氮比(C/N)对微藻混合营养生长的影响以及纳米材料在细胞回收和脂质改善方面的作用。在本研究中,从当地淡水体中分离、筛选出三种微藻用于脂质同化。这些微藻被鉴定为[具体名称1]和[具体名称2]。与光自养模式相比,使用各种有机碳源对每种微藻菌株进行混合营养培养更为可取。蔗糖是提高微藻生物量至3.5 g/L和脂质含量至58.35%的最佳碳源,与对照相比有显著提高。随后,采用响应面法-中心复合设计(RSM-CCD)工具优化C/N比,结果表明最大生物量产量为5.02 g/L,脂质含量增加至60.34%。在稳定期向培养物中添加钛纳米颗粒(Ti nps)以提高脂质含量,并通过纳米颗粒(np)介导的絮凝技术进行生物量去除。15 ppm Ti nps的优化浓度在45分钟沉降时间内确定了82.46%的细胞收获效率,并且脂质含量提高了***倍。通过酯交换过程将提取的脂质转化为脂肪酸甲酯(FAME),并通过气相色谱-质谱联用(GC-MS)进行分析。FAME的表征显示存在56.31%的饱和脂肪酸(SFA)和29.06%的不饱和脂肪酸(UFA),可用于可持续生物柴油生产。因此,我们的结果表明,混合营养培养和Ti nps的结合是一种新的具有成本效益的提高微藻生物量和脂质含量的方法。 (原文中“1.23-fold lipid enhancement was reported”这里“***倍”原文缺失具体数字)