Alizadeh Marzieh, Azar Parviz Aberoomand, Mozaffari Sayed Ahmad, Karimi-Maleh Hassan, Tamaddon Ali-Mohammad
Department of Chemistry, Science and Research Branch, Islamic Azad University, Tehran, Iran.
Thin Layer and Nanotechnology Laboratory, Department of Chemical Technologies, Iranian Research Organization for Science and Technology (IROST), Tehran, Iran.
Front Chem. 2020 Aug 19;8:677. doi: 10.3389/fchem.2020.00677. eCollection 2020.
Measuring the concentration of anticancer drugs in pharmacological and biological samples is a very useful solution to investigate the effectiveness of these drugs in the chemotherapy process. A Pt,Pd-doped, NiO-decorated SWCNTs (Pt,Pd-NiO/SWCNTs) nanocomposite was synthesized using a one-pot procedure and combining chemical precipitation and ultrasonic sonochemical methods and subsequently characterized by TEM and EDS analysis methods. The analyses results showed the high purity and good distribution of elements and the ~10-nm diameter of the Pt,Pd-NiO nanoparticle decorated on the surface of the SWCNTs with a diameter of about 20-30 nm. Using a combination of Pt,Pd-NiO/SWCNTs and 1-butyl-2,3-dimethylimidazolium tetrafluoroborate (1B23DTFB) in a carbon paste (CP) matrix, Pt,Pd-NiO/SWCNTs/1B23DTFB/CP was fabricated as a highly sensitive analytical tool for the electrochemical determination of daunorubicin in the concentration range of 0.008-350 μM with a detection limit of 3.0 nM. Compared to unmodified CP electrodes, the electro-oxidation process of daunorubicin has undergone significant improvements in current (about 9.8 times increasing in current) and potential (about 110 mV) decreasing in potential). It is noteworthy that the designed sensor can well measure daunorubicin in the presence of tamoxifen (two breast anticancer drugs with a ΔE = 315 mV. According to the real sample analysis data, the Pt,Pd-NiO/SWCNTs/1B23DTFB/CP has proved to be a promising methodology for the analysis and measuring of daunorubicin and tamoxifen in real (e.g., pharmaceutical) samples.
测量药理和生物样品中抗癌药物的浓度是研究这些药物在化疗过程中有效性的一种非常有用的方法。采用一锅法,结合化学沉淀和超声声化学方法合成了一种Pt、Pd掺杂、NiO修饰的单壁碳纳米管(Pt,Pd-NiO/SWCNTs)纳米复合材料,随后通过透射电子显微镜(TEM)和能谱(EDS)分析方法对其进行了表征。分析结果表明,元素纯度高、分布良好,直径约20-30nm的单壁碳纳米管表面修饰的Pt,Pd-NiO纳米颗粒直径约为10nm。在碳糊(CP)基质中使用Pt,Pd-NiO/SWCNTs和1-丁基-2,3-二甲基咪唑四氟硼酸盐(1B23DTFB)的组合,制备了Pt,Pd-NiO/SWCNTs/1B23DTFB/CP,作为一种高灵敏度的分析工具,用于电化学测定柔红霉素,浓度范围为0.008-350μM,检测限为3.0 nM。与未修饰的CP电极相比,柔红霉素的电氧化过程在电流(电流增加约9.8倍)和电位(电位降低约110 mV)方面有了显著改善。值得注意的是,所设计的传感器能够在他莫昔芬存在的情况下很好地测量柔红霉素(两种乳腺癌抗癌药物,ΔE = 315 mV)。根据实际样品分析数据,Pt,Pd-NiO/SWCNTs/1B23DTFB/CP已被证明是一种用于分析和测量实际(如药物)样品中柔红霉素和他莫昔芬的有前途的方法。