Rodriguez Marita L, Beussman Kevin M, Chun Katherine S, Walzer Melissa S, Yang Xiulan, Murry Charles E, Sniadecki Nathan J
Department of Mechanical Engineering, University of Washington, Seattle, Washington 98195, United States.
Department of Pathology, University of Washington, Seattle, Washington 98195, United States.
ACS Biomater Sci Eng. 2019 Aug 12;5(8):3876-3888. doi: 10.1021/acsbiomaterials.8b01256. Epub 2019 Feb 20.
Human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs) can be utilized to understand the mechanisms underlying the development and progression of heart disease, as well as to develop better interventions and treatments for this disease. However, these cells are structurally and functionally immature, which undermines some of their adequacy in modeling adult heart tissue. Previous studies with immature cardiomyocytes have shown that altering substrate stiffness, cell anisotropy, and/or cell-cell contact can enhance the contractile and structural maturation of hPSC-CMs. In this study, the structural and calcium handling properties of human embryonic stem cell-derived cardiomyocytes (hESC-CMs) were enhanced by exposure to a downselected combination of these three maturation stimuli. First, hESC-CMs were seeded onto substrates composed of two commercial formulations of polydimethylsiloxane (PDMS), Sylgard 184 and Sylgard 527, whose stiffness ranged from 5 kPa to 101 kPa. Upon analyzing the morphological and calcium transient properties of these cells, it was concluded that a 21 kPa substrate yielded cells with the highest degree of maturation. Next, these PDMS substrates were microcontact-printed with laminin to force the cultured cells into rod-shaped geometries using line patterns that were 12, 18, or 24 μm in width. We found that cells on the 18 and 24 μm pattern widths had structural and functional properties that were superior to those on the 12 μm pattern. The hESC-CMs were then seeded onto these line-stamped surfaces at a density of 500 000 cells per 25-mm-diameter substrate, to enable the formation of cell-cell contacts at their distal ends. We discovered that this combination of culture conditions resulted in cells that were more structurally and functionally mature than those that were only exposed to one or two stimuli. Our results suggest that downselecting a combination of mechanobiological stimuli could prove to be an effective means of maturing hPSC-CMs in vitro.
人类多能干细胞衍生的心肌细胞(hPSC-CMs)可用于了解心脏病发生和发展的潜在机制,以及开发针对该疾病的更好干预措施和治疗方法。然而,这些细胞在结构和功能上不成熟,这削弱了它们在模拟成人心脏组织方面的一些适用性。先前对未成熟心肌细胞的研究表明,改变底物硬度、细胞各向异性和/或细胞间接触可增强hPSC-CMs的收缩和结构成熟度。在本研究中,通过暴露于这三种成熟刺激的筛选组合,增强了人类胚胎干细胞衍生的心肌细胞(hESC-CMs)的结构和钙处理特性。首先,将hESC-CMs接种到由两种商用聚二甲基硅氧烷(PDMS)配方Sylgard 184和Sylgard 527组成的底物上,其硬度范围为5 kPa至101 kPa。在分析这些细胞的形态和钙瞬变特性后,得出结论:21 kPa的底物产生的细胞成熟度最高。接下来,用层粘连蛋白对这些PDMS底物进行微接触印刷,以使用宽度为12、18或24μm的线条图案将培养的细胞强制成杆状几何形状。我们发现,图案宽度为18和24μm的细胞的结构和功能特性优于图案宽度为12μm的细胞。然后将hESC-CMs以每25毫米直径底物500000个细胞的密度接种到这些线条标记的表面上,以使它们在远端形成细胞间接触。我们发现,这种培养条件组合产生的细胞在结构和功能上比仅暴露于一种或两种刺激的细胞更成熟。我们的结果表明,筛选机械生物学刺激的组合可能是在体外使hPSC-CMs成熟的有效方法。