Tian Run, Lei Yutian, Wang Kunzheng, Yang Pei
Department of Bone and Joint Surgery, the Second Affiliated Hospital of Xi'an Jiaotong University, Xi'an Shaanxi, 710004, P.R.China.
Zhongguo Xiu Fu Chong Jian Wai Ke Za Zhi. 2021 Oct 15;35(10):1246-1250. doi: 10.7507/1002-1892.202107037.
To compare the difference in the inclination and anteversion angles of the acetabular cup measured by intraoperative robot-assisted total hip arthroplasty (THA) and postoperative X-ray films and CT imaging.
The clinical data of 54 patients (54 hips) who underwent robot-assisted THA between May 2020 and December 2020 were retrospectively analyzed. Among them, there were 26 males (26 hips) and 28 females (28 hips), with an average age of 58.4 years (range, 39-71 years). The body mass index was 19.2-29.3 kg/m , with an average of 25.2 kg/m . All the patients had their first THA, including 31 cases of osteonecrosis of the femoral head, 12 cases of hip arthritis, 8 cases of femoral neck fracture, and 3 cases of developmental dysplasia of the hip. The anteversion and inclination angles of the acetabular cup were obtained through the surgical data in the robot host system. All patients underwent X-ray and CT scan examination within 2-7 days after operation to obtain the postoperative anteversion and inclination angles of the acetabular cup. According to the concept of "Lewinnek safe zone", the proportion of acetabular in the safe zone intra- and post-operation were compared.
The operation time was 57.8-89.2 minutes, with an average of 68.3 minutes; the intraoperative blood loss was 125.0-450.0 mL, with an average of 204.8 mL. No adverse events such as dislocation of hip joint and infection occurred during hospitalization. The anteversion angle of acetabular cup was (40.8±0.6)° during operation and (41.2±2.8)° after operation, with no significant difference ( =1.026, =0.307). The anteversion angle of acetabular cup measured during operation was (17.6±1.4)°, which was significantly smaller than that measured after operation (23.4±3.8)°( =10.520, =0.000). According to "Lewinnek safe zone", 54 hips (100%) were in the safety zone during operation, and 16 hips were out of the safety zone, 38 hips were in the safty zone after operation, the ratio of the hips in the safty zone was 70.4%, showing a significant difference ( =18.783, =0.000).
Robot-assisted THA can obtain accurate placement of the acetabular cup, but there is a large deviation between the anteversion angle of the acetabular cup in the lateral position during operation and the supine position after operation. Further study is needed to define the intraoperative placement position of the acetabular cup.
比较术中机器人辅助全髋关节置换术(THA)测量的髋臼杯倾斜角和前倾角与术后X线片及CT成像测量结果的差异。
回顾性分析2020年5月至2020年12月期间行机器人辅助THA的54例患者(54髋)的临床资料。其中男性26例(26髋),女性28例(28髋),平均年龄58.4岁(范围39 - 71岁)。体重指数为19.2 - 29.3kg/m²,平均为25.2kg/m²。所有患者均为首次行THA,其中股骨头坏死31例,髋关节炎12例,股骨颈骨折8例,发育性髋关节发育不良3例。通过机器人主机系统中的手术数据获取髋臼杯的前倾角和倾斜角。所有患者术后2 - 7天内行X线和CT扫描检查,以获取术后髋臼杯的前倾角和倾斜角。根据“Lewinnek安全区”的概念,比较手术中及术后髋臼杯在安全区内的比例。
手术时间为57.8 - 89.2分钟,平均68.3分钟;术中出血量为125.0 - 450.0mL,平均204.8mL。住院期间未发生髋关节脱位、感染等不良事件。术中髋臼杯前倾角为(40.8±0.6)°,术后为(41.2±2.8)°,差异无统计学意义(t = 1.026,P = 0.307)。术中测量的髋臼杯前倾角为(17.6±1.4)°,显著小于术后测量值(23.4±3.8)°(t = 10.520,P = 0.000)。根据“Lewinnek安全区”,手术中54髋(100%)在安全区内,术后16髋超出安全区,38髋在安全区内,安全区内髋的比例为70.4%,差异有统计学意义(χ² = 18.****** )。
机器人辅助THA可实现髋臼杯的精确放置,但术中侧卧位时髋臼杯的前倾角与术后仰卧位时存在较大偏差。需要进一步研究以明确术中髋臼杯的放置位置。 (注:原文中部分统计值未完整给出,翻译时保留原文格式)