Feng Chao, Liu Tong, Bu Xinyu, Huang Shifeng
Shandong Provincial Key Laboratory of Preparation and Measurement of Building Materials, University of Jinan, Jinan 250022, China.
Nanomaterials (Basel). 2021 Nov 12;11(11):3043. doi: 10.3390/nano11113043.
Fe-doped 0.71Pb(MgNb)O-0.29PbTiO (PMN-PT) thin films were grown in Pt/Ti/SiO/Si substrate by a chemical solution deposition method. Effects of the annealing temperature and doping concentration on the crystallinity, microstructure, ferroelectric and dielectric properties of thin film were investigated. High (111) preferred orientation and density columnar structure were achieved in the 2% Fe-doped PMN-PT thin film annealed at 650 °C. The preferred orientation was transferred to a random orientation as the doping concentration increased. A 2% Fe-doped PMN-PT thin film showed the effectively reduced leakage current density, which was due to the fact that the oxygen vacancies were effectively restricted and a transition of Ti to Ti was prevented. The optimal ferroelectric properties of 2% Fe-doped PMN-PT thin film annealed at 650 °C were identified with slim polarization-applied field loops, high saturation polarization ( = 78.8 µC/cm), remanent polarization ( = 23.1 µC/cm) and low coercive voltage ( = 100 kV/cm). Moreover, the 2% Fe-doped PMN-PT thin film annealed at 650 °C showed an excellent dielectric performance with a high dielectric constant ( ~1300 at 1 kHz).
采用化学溶液沉积法在Pt/Ti/SiO₂/Si衬底上生长了铁掺杂的0.71Pb(Mg₁/₃Nb₂/₃)O₃-0.29PbTiO₃(PMN-PT)薄膜。研究了退火温度和掺杂浓度对薄膜结晶度、微观结构、铁电和介电性能的影响。在650℃退火的2%铁掺杂PMN-PT薄膜中获得了高(111)择优取向和致密柱状结构。随着掺杂浓度的增加,择优取向转变为随机取向。2%铁掺杂的PMN-PT薄膜显示出有效降低的漏电流密度,这是由于氧空位得到有效限制且防止了Ti⁴⁺向Ti³⁺的转变。在650℃退火的2%铁掺杂PMN-PT薄膜具有最佳铁电性能,其极化-电场回线窄,饱和极化强度(Ps = 78.8 μC/cm²)、剩余极化强度(Pr = 23.1 μC/cm²)高,矫顽电压(Ec = 100 kV/cm)低。此外,在650℃退火的2%铁掺杂PMN-PT薄膜在1 kHz时具有高达1300左右的介电常数,表现出优异的介电性能。