White E, Shors E C
Dent Clin North Am. 1986 Jan;30(1):49-67.
Interpore-200 is the product of over 11 years of continuous research and development. It has been investigated at over 25 research centers in a wide variety of animal and human implant settings, including alveolar ridge augmentation, periodontics, and orthognathic reconstructions. The biomaterial aspects of Interpore-200 show the following: Interpore-200 has a highly interconnected, three-dimensional porosity that is uniform and consistent. The hydroxyapatite manufactured from marine corals is biocompatible and nontoxic. Interpore-200 is essentially pure hydroxyapatite, with the balance consisting of tricalcium phosphate. Interpore-200 is approximately 55 to 65 per cent porous with nominal pore diameters of 200 micron. Unlike nonporous materials, Interpore-200 is osteoconductive and results, when placed next to a viable bone, in an advancing front of bone into the implant. From 50 to 88 per cent of the porosity within the implant is filled with woven and lamellar bone within 3 months. Moreover, the surfaces of Interpore-200 are intimately bonded with the bone tissue. The biomechanical properties of Interpore-200 blocks are similar to those of a cancellous bone graft. Once ingrown with vascularized bone tissue, the defect site is, in effect, restored. Interpore-200 adequately matches the elastic properties of bone so that stresses necessary to maintain healthy bone are transmitted throughout the regenerated region. Extensive animal and clinical studies have shown that nonporous implants or implants without interconnected porosity can result in aberrant mineralization, stress shielding, low fatigue strength, and bulk displacement. Hydroxyapatite with interconnected porosity like Interpore-200 reacts differently than materials with limited or no porosity. In animals, Interpore-200 exhibits 0 to 5 per cent biodegradation per year. Moreover, this minimal biodegradation is compensated by regeneration of bone. These studies have now been extended for 4 years. Interpore-200 and its ingrown bone are remodeled in response to the same chemical and biomechanical forces that remodel normal bone. Therefore, Interpore-200 responds in accordance to Wolff's law. Having achieved an optimal combination of biomaterial (hydroxyapatite) in an ideal porous structure (replamineform), Interpore-200 fulfills the expectation of early researchers in the basic sciences who demonstrated that an interconnected porous material is better tolerated by the body than the same material in solid form.(ABSTRACT TRUNCATED AT 400 WORDS)
Interpore-200是11年多持续研发的成果。它已在25多个研究中心针对各种动物和人体植入情况进行了研究,包括牙槽嵴增高、牙周病学和正颌重建。Interpore-200的生物材料特性如下:Interpore-200具有高度互连的三维孔隙结构,均匀且一致。由海洋珊瑚制造的羟基磷灰石具有生物相容性且无毒。Interpore-200基本上是纯羟基磷灰石,其余部分为磷酸三钙。Interpore-200的孔隙率约为55%至65%,标称孔径为200微米。与无孔材料不同,Interpore-200具有骨传导性,当放置在有活力的骨旁边时,会使骨前沿向植入物推进。在3个月内,植入物内50%至88%的孔隙被编织骨和板层骨填充。此外,Interpore-200的表面与骨组织紧密结合。Interpore-200块的生物力学特性与松质骨移植相似。一旦被血管化的骨组织长入,缺损部位实际上就得到了修复。Interpore-200充分匹配骨的弹性特性,以便维持健康骨所需的应力能在整个再生区域传导。大量的动物和临床研究表明,无孔植入物或没有互连孔隙的植入物会导致异常矿化、应力遮挡、低疲劳强度和整体移位。像Interpore-200这样具有互连孔隙的羟基磷灰石与孔隙有限或无孔隙的材料反应不同。在动物中,Interpore-200每年的生物降解率为0%至5%。此外,这种最小程度的生物降解会被骨再生所补偿。这些研究现已延长至4年。Interpore-200及其长入骨会根据重塑正常骨的相同化学和生物力学力量进行重塑。因此,Interpore-200符合沃尔夫定律。Interpore-200在理想的多孔结构(复制模)中实现了生物材料(羟基磷灰石)的最佳组合,满足了基础科学早期研究人员的期望,他们证明互连的多孔材料比相同材料的固体形式更能被身体耐受。(摘要截选至400字)