Guo Jingwei, Hu Shengdong, Li Ping, Jiang Jie, Wang Ruoyu, Wang Yuan, Wu Hao
Chongqing Engineering Laboratory of High Performance Integrated Circuits, School of Microelectronics and Communication Engineering, Chongqing University, Chongqing 400044, China.
China Resources Microelectronics (Chongqing) Limited, Chongqing 401332, China.
Micromachines (Basel). 2022 Mar 18;13(3):464. doi: 10.3390/mi13030464.
In this article, an AlGaN and SiN compound buffer layer high electron mobility transistor (HEMT) is proposed and analyzed through TCAD simulations. In the proposed HEMT, the SiN insulating layer is partially buried between the AlGaN buffer layer and AlN nucleating layer, which introduces a high electric field from the vertical field plate into the internal buffer region of the device. The compound buffer layer can significantly increase the breakdown performance without sacrificing any dynamic characteristics and increasing the difficulty in the fabrication process. The significant structural parameters are optimized and analyzed. The simulation results reveal that the proposed HEMT with a 6 μm gate-drain distance shows an OFF-state breakdown voltage (BV) of 881 V and a specific ON-state resistance (R) of 3.27 mΩ·cm. When compared with the conventional field plate HEMT and drain connected field plate HEMT, the breakdown voltage could be increased by 148% and 94%, respectively.
在本文中,提出了一种AlGaN和SiN复合缓冲层高电子迁移率晶体管(HEMT),并通过TCAD模拟进行了分析。在所提出的HEMT中,SiN绝缘层部分埋入AlGaN缓冲层和AlN成核层之间,这将垂直场板产生的高电场引入到器件的内部缓冲区域。复合缓冲层可以在不牺牲任何动态特性且不增加制造工艺难度的情况下显著提高击穿性能。对重要的结构参数进行了优化和分析。模拟结果表明,所提出的栅漏间距为6μm的HEMT的关态击穿电压(BV)为881V,比导通电阻(R)为3.27mΩ·cm²。与传统场板HEMT和漏极连接场板HEMT相比,击穿电压分别可提高148%和94%。