Silesian Park of Medical Technology Kardio-Med Silesia in Zabrze, M. Curie Skłodowskiej 10C Str., 41-800 Zabrze, Poland.
The Chair and Department of Oral Surgery, Medical University of Lublin, Chodźki 6, 20-093 Lublin, Poland.
Int J Environ Res Public Health. 2022 Jun 18;19(12):7494. doi: 10.3390/ijerph19127494.
Patients undergoing implant treatment are at risk of peri-implant bone loss, which is most often caused by the adverse effects of microorganisms, but there are few proven procedures for their reduction. The aim of the research was to identify the microorganisms inhabiting the composites used to close the screw access hole (SAH), compare them numerically with those present on the surface of crowns and teeth, and optimize the doses of the diode laser, which will reduce microorganisms and will not deteriorate the roughness of polished composites. Patients were swabbed from the surface of SAH composites, from porcelain and zirconium restorations, and from teeth, and then the number of microorganisms was determined by using a culture technique. Microorganisms were identified by MALDI-TOF MS and NGS sequencing. The effectiveness of diode laser irradiation was achieved by using four variants of exposure. After polishing and laser irradiation, the surface roughness of the composites was studied by using optical profilometry. On the surface of SAH, 10 to 10 microorganisms were identified at 0.4 cm, including many pathogenic species. Among the materials used for the reconstruction of dental implants, the greatest microbiological contamination was found on the composites used to close the SAH. The diode laser with a wavelength of 810 nm with an average power of 3.84 W, during 60 s and 2 × 30 s, has a biocidal effect and does not significantly change the surface roughness of composites. The best reduction of microorganisms was achieved on a composite polished with a polishing rubber and then with a Sof-Lex™ Pre-Polishing Spiral beige (3M ESPE, Ave. St. Paul., MN, USA). Studies have shown that using the optimal laser dose can help treat periimplantitis. These studies provide important information on the possibility of the effective elimination of microorganisms by using a diode laser in the treatment of peri-implant bone loss.
患者在接受种植体治疗时存在种植体周围骨丧失的风险,这种情况通常是由微生物的不良反应引起的,但目前减少这种风险的方法并不多。本研究的目的是确定用于封闭螺丝通道入口(SAH)的复合材料中存在的微生物,并与牙冠和牙齿表面的微生物进行数值比较,同时优化二极管激光剂量,以减少微生物而不会降低抛光复合材料的粗糙度。从 SAH 复合材料、烤瓷和氧化锆修复体以及牙齿表面采集拭子,然后使用培养技术确定微生物数量。使用 MALDI-TOF MS 和 NGS 测序鉴定微生物。通过使用四种不同的暴露方式来实现二极管激光照射的效果。抛光和激光照射后,使用光学轮廓仪研究复合材料的表面粗糙度。在 SAH 表面,在 0.4cm 处鉴定出 10 到 10 个微生物,其中包括许多致病性物种。在所使用的用于重建种植牙的材料中,用于封闭 SAH 的复合材料的微生物污染最大。波长为 810nm、平均功率为 3.84W 的二极管激光,在 60s 和 2×30s 的照射下具有杀菌效果,且不会显著改变复合材料的表面粗糙度。用抛光橡胶和 Sof-Lex™ Pre-Polishing Spiral beige(3M ESPE,Ave. St. Paul., MN,USA)抛光后的复合材料可实现最佳的微生物减少效果。研究表明,使用最佳激光剂量有助于治疗种植体周围炎。这些研究为使用二极管激光治疗种植体周围骨丧失时有效消除微生物提供了重要信息。