Department of Chemical and Biomolecular Engineering, University of Delaware, 150 Academy St., Newark, DE, 19716, USA.
Department of Chemistry and Biochemistry, University of Delaware, 150 Academy St., Newark, DE, 19716, USA.
J Nanobiotechnology. 2023 Feb 3;21(1):39. doi: 10.1186/s12951-023-01782-w.
The adoption of pulmonary vaccines to advantageously provide superior local mucosal protection against aerosolized pathogens has been faced with numerous logistical and practical challenges. One of these persistent challenges is the lack of effective vaccine adjuvants that could be well tolerated through the inhaled route of administration. Despite its widespread use as a vaccine adjuvant, aluminum salts (alum) are not well tolerated in the lung. To address this issue, we evaluated the use of porous aluminum (Al)-based metal-organic framework (MOF) nanoparticles (NPs) as inhalable adjuvants. We evaluate a suite of Al-based MOF NPs alongside alum including DUT-4, DUT-5, MIL-53 (Al), and MIL-101-NH (Al). As synthesized, MOF NPs ranged between ~ 200 nm and 1 µm in diameter, with the larger diameter MOFs matching those of commercial alum. In vitro examination of co-stimulatory markers revealed that the Al-based MOF NPs activated antigen presenting cells more effectively than alum. Similar results were found during in vivo immunizations utilizing ovalbumin (OVA) as a model antigen, resulting in robust mucosal humoral responses for all Al MOFs tested. In particular, DUT-5 was able to elicit mucosal OVA-specific IgA antibodies that were significantly higher than the other MOFs or alum dosed at the same NP mass. DUT-5 also was uniquely able to generate detectable IgG2a titers, indicative of a cellular immune response and also had superior performance relative to alum at equivalent Al dosed in a reduced dosage vaccination study. All MOF NPs tested were generally well-tolerated in the lung, with only acute levels of cellular infiltrates detected and no Al accumulation; Al content was largely cleared from the lung and other organs at 28 days despite the two-dose regime. Furthermore, all MOF NPs exhibited mass median aerodynamic diameters (MMADs) of ~ 1.5-2.5 µm when dispersed from a generic dry powder inhaler, ideal for efficient lung deposition. While further work is needed, these results demonstrate the great potential for use of Al-based MOFs for pulmonary vaccination as novel inhalable adjuvants.
将肺部疫苗用于对雾化病原体提供优越的局部粘膜保护具有许多后勤和实际挑战。其中一个持续存在的挑战是缺乏可通过吸入途径给予而具有良好耐受性的有效疫苗佐剂。尽管铝盐(明矾)被广泛用作疫苗佐剂,但在肺部中不能很好地耐受。为了解决这个问题,我们评估了多孔铝(Al)基金属-有机骨架(MOF)纳米粒子(NP)作为可吸入佐剂的用途。我们评估了一系列 Al 基 MOF NP 与明矾一起,包括 DUT-4、DUT-5、MIL-53(Al)和 MIL-101-NH(Al)。合成时,MOF NP 的直径在 200nm 到 1μm 之间,较大直径的 MOF 与商业明矾相匹配。体外共刺激标志物检测表明,Al 基 MOF NP 比明矾更有效地激活抗原呈递细胞。在利用卵清蛋白(OVA)作为模型抗原的体内免疫接种中也发现了类似的结果,导致所有测试的 Al MOF 都产生了强大的粘膜体液反应。特别是,DUT-5 能够引发粘膜 OVA 特异性 IgA 抗体,其水平明显高于其他 MOF 或明矾以相同 NP 质量给药。DUT-5 还能够产生可检测的 IgG2a 滴度,表明细胞免疫反应,并且在相同 Al 剂量的减少剂量接种研究中相对于明矾具有更好的性能。所有测试的 MOF NP 在肺部中通常具有良好的耐受性,仅检测到急性细胞浸润水平,并且没有 Al 积累;尽管采用了两剂量方案,但在 28 天时,Al 含量从肺部和其他器官中大量清除。此外,当从通用干粉吸入器分散时,所有 MOF NP 均表现出质量中值空气动力学直径(MMAD)约为 1.5-2.5μm,非常适合有效肺部沉积。尽管需要进一步的工作,但这些结果表明,Al 基 MOF 作为新型可吸入佐剂用于肺部疫苗接种具有很大的潜力。