Suppr超能文献

利用 TAPaC 平台研究不同通风条件对车内烟草烟雾相关颗粒物排放的影响。

Impact of different ventilation conditions on tobacco smoke-associated particulate matter emissions in a car cabin using the TAPaC platform.

机构信息

Institute of Occupational Medicine, Social Medicine, and Environmental Medicine, Goethe University Frankfurt, Theodor-Stern-Kai 7, 60590, Frankfurt am Main, Germany.

出版信息

Sci Rep. 2023 May 22;13(1):8216. doi: 10.1038/s41598-023-35208-2.

Abstract

Despite antagonizing attempts from the tobacco industry, passive inhalation of tobacco smoke is known to be cancerogenic and toxic to human health for decades. Nonetheless, millions of non-smoking adults and children are still victims of second-hand smoke. Accumulation of particulate matter (PM) in confined spaces such as the car are particularly harmful due to high concentrations. We here aimed to analyze the specific effects of ventilation conditions in the setting of a car. By the use of the measuring platform TAPaC (tobacco-associated particulate matter emissions inside a car cabin), 3R4F reference cigarettes, Marlboro red, and Marlboro gold were smoked in a car interior with a volume of 3.709 m. Seven different ventilation conditions (C1-C7) were analyzed. Under C1, all windows were closed. Under C2-C7, the car ventilation was turned on power level 2/4 with the air directed towards the windshield. Only the passenger side window was opened, where an outer placed fan could create an airstream speed of 15.9-17.4 km/h at one meter distance to simulate a driving car. C2: Window 10 cm opened. C3: Window 10 cm opened with the fan turned on. C4: Window half-opened. C5: Window half-opened with the fan turned on. C6: Window fully opened. C7: Window fully opened with the fan turned on. Cigarettes were remotely smoked by an automatic environmental tobacco smoke emitter and a cigarette smoking device. Depending on the ventilation condition the cigarettes emitted different mean PM concentrations after 10 min under condition C1 (PM: 1272-1697 µg/m, PM: 1253-1659 µg/m, PM: 964-1263 µg/m) under C2, C4, and C6 (PM: 68.7-196.2 µg/m, PM: 68.2-194.7 µg/m, PM: 66.1-183.8 µg/m) C3, C5, and C7 (PM: 73.7-139 µg/m, PM: 72-137.9 µg/m, PM:68.9-131.9 µg/m). Vehicle ventilation is insufficient to protect passengers from toxic second-hand smoke completely. Brand-specific variations of tobacco ingredients and mixtures markedly influence PM emissions under ventilation conditions. The most efficient ventilation mode to reduce PM exposure was achieved by opening the passenger´s window 10 cm and turning the onboard ventilation on power level 2/4. In-vehicle smoking should be banned to preserve innocent risk groups (e.g., children) from harm.

摘要

尽管烟草业一直试图反对,但几十年来,被动吸入烟草烟雾已被证实对人类健康具有致癌性和毒性。尽管如此,数以百万计的不吸烟的成年人和儿童仍然是二手烟的受害者。在封闭的空间(如汽车内),颗粒物(PM)的积聚尤其有害,因为浓度很高。我们旨在分析汽车环境中通风条件的具体影响。使用 TAPaC(车内与吸烟相关的颗粒物排放测量平台),在一辆体积为 3.709 立方米的汽车内饰中,分别吸食 3R4F 参考香烟、万宝路红、万宝路金。分析了 7 种不同的通风条件(C1-C7)。在 C1 下,所有车窗均关闭。在 C2-C7 下,汽车通风开到 2/4 档,空气流向挡风玻璃。只有乘客侧车窗打开,车窗外部放置的风扇可以在一米距离处产生 15.9-17.4 公里/小时的气流速度,以模拟行驶中的汽车。C2:车窗打开 10 厘米。C3:车窗打开 10 厘米并打开风扇。C4:车窗半开。C5:车窗半开并打开风扇。C6:车窗全开。C7:车窗全开并打开风扇。香烟由自动环境烟草烟雾发射器和香烟吸烟装置远程吸烟。根据通风条件的不同,在 C1 条件下,香烟在 10 分钟后排放的平均 PM 浓度不同(PM:1272-1697µg/m,PM:1253-1659µg/m,PM:964-1263µg/m)在 C2、C4 和 C6(PM:68.7-196.2µg/m,PM:68.2-194.7µg/m,PM:66.1-183.8µg/m)下,C3、C5 和 C7(PM:73.7-139µg/m,PM:72-137.9µg/m,PM:68.9-131.9µg/m)。车辆通风不足以完全保护乘客免受有毒二手烟的侵害。烟草成分和混合物的品牌特异性变化明显影响通风条件下的 PM 排放。降低 PM 暴露的最有效通风模式是将乘客车窗打开 10 厘米,并将车载通风开到 2/4 档。为了保护无辜的风险群体(例如儿童)免受伤害,应禁止在车内吸烟。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/65fe/10203320/d00fee0c8ab3/41598_2023_35208_Fig1_HTML.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验