Dachraoui Walid, Pauer Robin, Battaglia Corsin, Erni Rolf
Electron Microscopy Center, Empa─Swiss Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, 8600 Dübendorf, Switzerland.
Materials for Energy Conversion, Empa─Swiss Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, 8600 Dübendorf, Switzerland.
ACS Nano. 2023 Oct 24;17(20):20434-20444. doi: 10.1021/acsnano.3c06879. Epub 2023 Oct 13.
The solid electrolyte interphase (SEI) is a key component of a lithium-ion battery forming during the first few dischage/charge cycles at the interface between the anode and the electrolyte. The SEI passivates the anode-electrolyte interface by inhibiting further electrolyte decomposition, extending the battery's cycle life. Insights into SEI growth and evolution in terms of structure and composition remain difficult to access. To unravel the formation of the SEI layer during the first cycles, operando electrochemical liquid cell scanning transmission electron microscopy (ec-LC-STEM) is employed to monitor in real time the nanoscale processes that occur at the anode-electrolyte interface in their native electrolyte environment. The results show that the formation of the SEI layer is not a one-step process but comprises multiple steps. The growth of the SEI is initiated at low potential during the first charge by decomposition of the electrolyte leading to the nucleation of inorganic nanoparticles. Thereafter, the growth continues during subsequent cycles by forming an island-like layer. Eventually, a dense layer is formed with a mosaic structure composed of larger inorganic patches embedded in a matrix of organic compounds. While the mosaic model for the structure of the SEI is generally accepted, our observations document in detail how the complex structure of the SEI is built up during discharge/charge cycling.
固体电解质界面(SEI)是锂离子电池的关键组成部分,在阳极与电解质之间的界面处,在最初的几次充放电循环中形成。SEI通过抑制电解质的进一步分解来钝化阳极 - 电解质界面,从而延长电池的循环寿命。关于SEI在结构和组成方面的生长和演变的见解仍然难以获得。为了揭示第一个循环期间SEI层的形成过程,采用原位电化学液体池扫描透射电子显微镜(ec-LC-STEM)实时监测在其原生电解质环境中阳极 - 电解质界面处发生的纳米级过程。结果表明,SEI层的形成不是一个一步过程,而是包括多个步骤。SEI的生长在第一次充电期间通过电解质分解在低电位下开始,导致无机纳米颗粒的成核。此后,在随后的循环中通过形成岛状层继续生长。最终,形成了一个致密层,其具有由嵌入有机化合物基质中的较大无机斑块组成的镶嵌结构。虽然SEI结构的镶嵌模型已被普遍接受,但我们的观察详细记录了在充放电循环期间SEI的复杂结构是如何形成的。