Wang Jianing, Wang Xi, Li Yihang, Yang Yanfu, Song Qinghai, Xu Ke
Opt Lett. 2024 Feb 15;49(4):1085-1088. doi: 10.1364/OL.515378.
Recently, the 2-µm wave band has gained increased interest due to its potential application for the next-generation optical communication. As a proven integration platform, silicon photonics also benefit from the lower nonlinear absorption and larger electro-optic coefficient. However, this spectral range is far beyond the photodetection range of germanium, which places an ultimate limit for on-chip applications. In this work, we demonstrate a waveguide-coupled photodetector enabled by a tensile strain-induced absorption in germanium. Responsivity is greatly enhanced by the proposed interleaved junction structure. The device is designed on a 220-nm silicon-on-insulator and is fabricated via a standard silicon photonic foundry process. By utilizing different interleaved PN junction spacing configurations, we were able to measure a responsivity of 0.107 A/W at 1950 nm with a low bias voltage of -6.4 V for the 500-μm-long device. Additionally, the 3-dB bandwidth of the device was measured to be up to 7.1 GHz. Furthermore, we successfully achieved data transmission at a rate of 20 Gb/s using non-return-to-zero on-off keying modulation.
最近,由于其在下一代光通信中的潜在应用,2微米波段受到了越来越多的关注。作为一个成熟的集成平台,硅光子学也受益于较低的非线性吸收和较大的电光系数。然而,这个光谱范围远远超出了锗的光电探测范围,这对片上应用设置了一个极限。在这项工作中,我们展示了一种通过锗中的拉伸应变诱导吸收实现的波导耦合光电探测器。所提出的交错结结构极大地提高了响应度。该器件基于220纳米绝缘体上硅设计,并通过标准的硅光子制造工艺制造。通过利用不同的交错PN结间距配置,对于500微米长的器件,我们能够在1950纳米处测量到0.107 A/W的响应度,偏置电压低至-6.4 V。此外,该器件的3分贝带宽测量高达7.1 GHz。此外,我们使用非归零开关键控调制成功实现了20 Gb/s的数据传输。