Xiang Feifan, Xiao Yukun, Li Dige, Ma Wenzhe, Chen Yue, Yang Yunkang
The State Key Laboratory of Quality Research in Chinese Medicine, Macau University of Science and Technology, Macau, China.
Department of Orthopedic, Affiliated Hospital of Southwest Medical University, Luzhou, China.
Front Bioeng Biotechnol. 2024 Mar 7;12:1340482. doi: 10.3389/fbioe.2024.1340482. eCollection 2024.
Few reports exist on the treatment of transverse patellar fractures (TPFs) using absorbable cannulated screws and high-strength sutures, and most screws and sutures lack good biomechanics and clinical trials. Therefore, this study aimed to demonstrate the biomechanical stability and clinical efficacy of tension-band high-strength sutures combined with absorbable cannulated screws (TBSAS) in treating TPFs (AO/OTA 34 C1). Finite element models of five internal fixation schemes were established: tension-band wire with K-wire (TBW), TBW with cerclage wire (TBWC), TBW with headless pressure screws (TBWHS), TBW with full-thread screws (TBWFS), and TBSAS. We comprehensively compared the biomechanical characteristics of the TBSAS treatment scheme during knee flexion and extension. Forty-one patients with TPFs in our hospital between January 2020 and August 2022 were retrospectively enrolled and divided into the TBSAS ( = 22) and TBWC ( = 19) groups. Clinical and follow-up outcomes, including operative time, visual analog scale (VAS) pain score, postoperative complications, Bostman score, and final knee range of motion, were compared between both groups. Finite element analysis (FEA) showed that TBWHS and TBWFS achieved the minimum mean fracture interface relative displacement during knee flexion (45°, 0-500 N bending load) and full extension (0°, 0-500 N axial load). There was no significant difference between TBSAS (0.136 mm) and TBWC (0.146 mm) during knee flexion (500 N); however, TBSAS displacement was smaller (0.075 mm) during full extension (500 N). Furthermore, the stress results for the internal fixation and the patella were generally lower when using TBSAS. Retrospective clinical studies showed that the TBSAS group had a shorter operative time, lower VAS pain score at 1 and 2 months postoperatively, better Bostman knee function score at 3 and 9 months postoperatively, and better final knee joint motion than the TBWC group (all < 0.05). There were five cases (26.3%) of internal fixation stimulation complications in the TBWC group. TBSAS demonstrated excellent safety and effectiveness in treating TPFs. It is sufficient to meet the needs of TPF fixation and early functional exercise and effectively reduces metal internal fixation-induced complications and secondary surgery-induced trauma.
关于使用可吸收空心螺钉和高强度缝线治疗髌骨横行骨折(TPF)的报道较少,并且大多数螺钉和缝线缺乏良好的生物力学性能和临床试验。因此,本研究旨在证明张力带高强度缝线联合可吸收空心螺钉(TBSAS)治疗TPF(AO/OTA 34 C1)的生物力学稳定性和临床疗效。建立了五种内固定方案的有限元模型:克氏针张力带钢丝(TBW)、环扎钢丝辅助克氏针张力带钢丝(TBWC)、无头加压螺钉辅助克氏针张力带钢丝(TBWHS)、全螺纹螺钉辅助克氏针张力带钢丝(TBWFS)和TBSAS。我们全面比较了TBSAS治疗方案在膝关节屈伸过程中的生物力学特性。回顾性纳入了2020年1月至2022年8月期间我院41例TPF患者,并将其分为TBSAS组(n = 22)和TBWC组(n = 19)。比较了两组的临床和随访结果,包括手术时间、视觉模拟评分(VAS)疼痛评分、术后并发症、Bostman评分和最终膝关节活动范围。有限元分析(FEA)表明,TBWHS和TBWFS在膝关节屈曲(45°,0 - 500 N弯曲载荷)和完全伸展(0°,0 - 500 N轴向载荷)过程中实现的平均骨折界面相对位移最小。在膝关节屈曲(500 N)时,TBSAS(0.136 mm)和TBWC(0.146 mm)之间无显著差异;然而,在完全伸展(500 N)时,TBSAS的位移较小(0.075 mm)。此外,使用TBSAS时,内固定和髌骨的应力结果总体较低。回顾性临床研究表明,TBSAS组的手术时间较短,术后1个月和2个月时的VAS疼痛评分较低,术后3个月和9个月时的Bostman膝关节功能评分较好,最终膝关节活动度也优于TBWC组(均P < 0.05)。TBWC组有5例(26.3%)发生内固定刺激并发症。TBSAS在治疗TPF方面表现出优异的安全性和有效性。它足以满足TPF固定和早期功能锻炼的需求,并有效减少金属内固定引起的并发症和二次手术造成的创伤。