Gregg R V
Stain Technol. 1975 Mar;50(2):87-91. doi: 10.3109/10520297509117040.
As a macroscopic stain for gross brain sections to be embedded in plastic, tannic acid-iron alum is superior to the generally recommended LeMasurier's variation of the Berlin blue technique because of its greater permanency in plastic. However, as originally adopted for use with brain tissue by Mulligan, the intense black staining of gray matter is too dark for plastic embedded specimens. A modification of this method designed to overcome this difficulty is described. Staining procedure: Wash formalin-fixed brain slices overnight in running water. Wash in distilled water, 2 changes, 30 minutes each. Place slices individually in Mulligan's solution at a temperature of 60-65 C for 4 minutes. Rinse in ice water for 10 seconds. Mordant in 0.4% tannic acid in distilled water for 1 minute. Wash in running tap water for 1 minute. Develop in 0.08% ferric ammonium sulfate in distilled water until gray matter is light gray, about 10-15 seconds. Wash in lukewarm running water for 1 hour, then gently hand-rub whitish film from myelinated surfaces. Store briefly in 3% formalin or 25% glycerine if necessary depending on plastic embedding procedure to be followed.
