Lu Helen H, Tang Amy, Oh Seong Cheol, Spalazzi Jeffrey P, Dionisio Kathie
Biomaterials and Interface Tissue Engineering Laboratory, Department of Biomedical Engineering, Columbia University, 351 Engineering Terrace Building, MC 8904, 1210 Amsterdam Avenue, New York, NY 10027, USA.
Biomaterials. 2005 Nov;26(32):6323-34. doi: 10.1016/j.biomaterials.2005.04.005.
Biodegradable polymer-ceramic composites are attractive systems for bone tissue engineering applications. These composites have the combined advantages of the component phases, as well as the inherent ease in optimization where desired material properties can be tailored in a well-controlled manner. This study focuses on the optimization of a polylactide-co-glycolide (PLAGA) and 45S5 bioactive glass (BG) composite for bone tissue engineering. The first objective is to examine the effects of composition or overall BG content on the formation of a Ca-P layer on the PLAGA-BG composite. It is expected that with increasing BG content (0%, 10%, 25%, 50% by weight), the required incubation time in a simulated body fluid (SBF) for the composite to form a detectable surface Ca-P layer will decrease. Both the kinetics and the chemistry will be determined using SEM+EDAX, FTIR, and mu-CT methods. Solution phosphorous and calcium concentrations will also be measured. The second objective of the study is to determine the effects of BG content on the maturation of osteoblast-like cells on the PLAGA-BG composite. It is hypothesized that mineralization will increase with increasing BG content, and the composite will support the proliferation and differentiation of osteoblasts. Specifically, cell proliferation, alkaline phosphatase activity and mineralization will be monitored as a function of BG content (0%, 10%, 50% by weight) and culturing time. It was found that the kinetics of Ca-P layer formation and the resulting Ca-P chemistry were dependent on BG content. The response of human osteoblast-like cells to the PLAGA-BG composite was also a function of BG content. The 10% and 25% BG composite supported greater osteoblast growth and differentiation compared to the 50% BG group. The results of this study suggest that there is a threshold BG content which is optimal for osteoblast growth, and the interactions between PLAGA and BG may modulate the kinetics of Ca-P formation and the overall cellular response.
可生物降解的聚合物-陶瓷复合材料是骨组织工程应用中具有吸引力的体系。这些复合材料兼具各组成相的优点,并且在优化方面具有内在的便利性,能够以良好控制的方式定制所需的材料性能。本研究聚焦于用于骨组织工程的聚乳酸-乙醇酸共聚物(PLAGA)与45S5生物活性玻璃(BG)复合材料的优化。首要目标是研究组成或总体BG含量对PLAGA-BG复合材料上钙磷层形成的影响。预计随着BG含量(重量百分比分别为0%、10%、25%、50%)的增加,复合材料在模拟体液(SBF)中形成可检测表面钙磷层所需的孵育时间将会减少。将使用扫描电子显微镜+能谱仪(SEM+EDAX)、傅里叶变换红外光谱仪(FTIR)和微观计算机断层扫描(μ-CT)方法来确定动力学和化学性质。还将测量溶液中的磷和钙浓度。该研究的第二个目标是确定BG含量对PLAGA-BG复合材料上类成骨细胞成熟的影响。据推测,矿化作用会随着BG含量的增加而增强,并且该复合材料将支持成骨细胞的增殖和分化。具体而言,将监测细胞增殖、碱性磷酸酶活性和矿化作用与BG含量(重量百分比分别为0%、10%、50%)及培养时间的关系。研究发现,钙磷层形成的动力学以及由此产生的钙磷化学性质取决于BG含量。人源类成骨细胞对PLAGA-BG复合材料的反应同样是BG含量的函数。与50%BG组相比,10%和25%BG复合材料支持更大程度的成骨细胞生长和分化。本研究结果表明,存在一个对成骨细胞生长而言最佳的BG含量阈值,并且PLAGA与BG之间可能的相互作用会调节钙磷形成的动力学以及整体细胞反应。