Suppr超能文献

组织工程植入物对牙槽骨的保存与再生

Preservation and regeneration of alveolar bone by tissue-engineered implants.

作者信息

Marei Mona K, Nouh Samir R, Saad Manal M, Ismail Naglaa S

机构信息

Tissue Engineering Laboratories, Faculty of Dentistry, Alexandria University, Alexandria, Egypt.

出版信息

Tissue Eng. 2005 May-Jun;11(5-6):751-67. doi: 10.1089/ten.2005.11.751.

Abstract

Bone maintenance after dental extraction has a significant impact on the success of future treatment. The purpose of this study was to regenerate bone by implanting an engineered porous scaffold seeded with bone marrow mesenchymal stem cells (BMSCs) in a socket created by extraction of the lower left central incisor in rabbits, utilizing the principles of tissue engineering. It involved preparation and characterization of three-dimensional porous hollow root form scaffolds consisting of a poly-L-lactic acid:polyglycolic acid composite (PLG, 50:50), using a solvent casting/compression molding/particulate leaching technique. Porosity of the scaffolds was 83.71% with good interconnectivity and uniform distribution of the various pore sizes. The degraded scaffolds maintained their porosity and form for the first 2 weeks and their mass loss continued up to 6 weeks. The scaffolds developed viscoelastic behavior under dynamic compression; yet they lost their mechanical characteristics as they degraded. The scaffolds were seeded with BMSCs and examined by scanning electron microscopy. Cell proliferation and scaffold degradation were shown up to 2 weeks in vitro. The cultivated scaffolds were implanted in empty extraction sockets immediately after tooth removal. Four weeks later, bone regeneration was evaluated histologically in the healed sockets in three experimental groups: sockets left empty, sockets that received PLG without cells, and sockets that received PLG with cells. Radiographic evaluation, performed 4 weeks later for the three experimental groups, demonstrated preservation of alveolar bone walls in the extraction sockets that received PLG with cells as compared with the other two groups. The bone density profile for the healed sockets confirmed both histological and radiographic findings. The results of this study show promise in the area of dentoalveolar surgery, yet longitudinal studies under variable clinical situations would encourage the current application.

摘要

拔牙后的骨维持对未来治疗的成功具有重大影响。本研究的目的是利用组织工程原理,通过将接种了骨髓间充质干细胞(BMSCs)的工程化多孔支架植入兔左下中切牙拔除后形成的牙槽窝中来再生骨。该研究包括使用溶剂浇铸/压缩成型/颗粒沥滤技术制备和表征由聚-L-乳酸:聚乙醇酸复合材料(PLG,50:50)组成的三维多孔空心根形支架。支架的孔隙率为83.71%,具有良好的连通性和各种孔径的均匀分布。降解后的支架在最初2周内保持其孔隙率和形状,其质量损失持续至6周。支架在动态压缩下表现出粘弹性行为;然而,随着它们的降解,它们失去了机械特性。将支架接种BMSCs并通过扫描电子显微镜检查。在体外观察到细胞增殖和支架降解持续至2周。拔牙后立即将培养的支架植入空的拔牙窝中。4周后,对三个实验组愈合的牙槽窝进行组织学评估:空置的牙槽窝、接受无细胞PLG的牙槽窝和接受有细胞PLG的牙槽窝。4周后对三个实验组进行的影像学评估表明,与其他两组相比,接受有细胞PLG的拔牙窝中牙槽骨壁得以保留。愈合牙槽窝的骨密度情况证实了组织学和影像学检查结果。本研究结果在牙槽外科领域显示出前景,但在不同临床情况下的纵向研究将推动当前的应用。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验