Suppr超能文献

在固态和液态发酵中使用聚合物固体支持物生产真菌抗生素。

Production of fungal antibiotics using polymeric solid supports in solid-state and liquid fermentation.

作者信息

Bigelis Ramunas, He Haiyin, Yang Hui Y, Chang Li-Ping, Greenstein Michael

机构信息

Natural Products Research, Chemical and Screening Sciences, Wyeth Research, Pearl River, NY 10965, USA.

出版信息

J Ind Microbiol Biotechnol. 2006 Oct;33(10):815-26. doi: 10.1007/s10295-006-0126-z. Epub 2006 May 6.

Abstract

The use of inert absorbent polymeric supports for cellular attachment in solid-state fungal fermentation influenced growth, morphology, and production of bioactive secondary metabolites. Two filamentous fungi exemplified the utility of this approach to facilitate the discovery of new antimicrobial compounds. Cylindrocarpon sp. LL-Cyan426 produced pyrrocidines A and B and Acremonium sp. LL-Cyan416 produced acremonidins A-E when grown on agar bearing moist polyester-cellulose paper and generated distinctly different metabolite profiles than the conventional shaken or stationary liquid fermentations. Differences were also apparent when tenfold concentrated methanol extracts from these fermentations were tested against antibiotic-susceptible and antibiotic-resistant Gram-positive bacteria, and zones of inhibition were compared. Shaken broth cultures of Acremonium sp. or Cylindrocarpon sp. showed complex HPLC patterns, lower levels of target compounds, and high levels of unwanted compounds and medium components, while agar/solid support cultures showed significantly increased yields of pyrrocidines A and B and acremonidins A-E, respectively. This method, mixed-phase fermentation (fermentation with an inert solid support bearing liquid medium), exploited the increase in surface area available for fungal growth on the supports and the tendency of some microorganisms to adhere to solid surfaces, possibly mimicking their natural growth habits. The production of dimeric anthraquinones by Penicillium sp. LL-WF159 was investigated in liquid fermentation using various inert polymeric immobilization supports composed of polypropylene, polypropylene cellulose, polyester-cellulose, or polyurethane. This culture produced rugulosin, skyrin, flavomannin, and a new bisanthracene, WF159-A, after fermentation in the presence and absence of polymeric supports for mycelial attachment. The physical nature of the different support systems influenced culture morphology and relative metabolite yields, as determined by HPLC analysis and measurement of antimicrobial activity. The application of such immobilized-cell fermentation methods under solid and liquid conditions facilitated the discovery of new antibiotic compounds, and offers new approaches to fungal fermentation for natural product discovery.

摘要

在固态真菌发酵中使用惰性吸收性聚合物载体用于细胞附着,会影响生物活性次级代谢产物的生长、形态和产生。两种丝状真菌例证了这种方法在促进发现新的抗菌化合物方面的效用。柱孢属真菌LL - Cyan426产生了吡咯菌素A和B,而顶孢属真菌LL - Cyan416在含有湿润聚酯 - 纤维素纸的琼脂上生长时产生了顶孢菌素A - E,并且与传统的振荡或静止液体发酵相比,产生了明显不同的代谢产物谱。当对这些发酵的十倍浓缩甲醇提取物针对对抗生素敏感和耐药的革兰氏阳性细菌进行测试并比较抑菌圈时,差异也很明显。顶孢属真菌或柱孢属真菌的振荡肉汤培养物显示出复杂的高效液相色谱图谱、目标化合物含量较低以及不需要的化合物和培养基成分含量较高,而琼脂/固体载体培养物分别显示出吡咯菌素A和B以及顶孢菌素A - E的产量显著增加。这种方法,即混合相发酵(用含有液体培养基的惰性固体载体进行发酵),利用了载体上可用于真菌生长的表面积增加以及一些微生物附着于固体表面的趋势,可能模拟了它们的自然生长习性。使用由聚丙烯、聚丙烯纤维素、聚酯 - 纤维素或聚氨酯组成的各种惰性聚合物固定化载体,在液体发酵中研究了青霉属真菌LL - WF159产生二聚蒽醌的情况。在有和没有用于菌丝附着的聚合物载体的情况下发酵后,这种培养物产生了皱褶青霉素、天青霉素、黄霉素以及一种新的双蒽醌WF159 - A。通过高效液相色谱分析和抗菌活性测量确定,不同载体系统的物理性质影响培养形态和相对代谢产物产量。这种固定化细胞发酵方法在固体和液体条件下的应用促进了新抗生素化合物的发现,并为天然产物发现的真菌发酵提供了新方法。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验