Suppr超能文献

使用瓜尔胶作为生物模板的氧化铜纳米粒子的绿色合成及其抗菌应用。

Green synthesis of copper oxide nanoparticles using gum karaya as a biotemplate and their antibacterial application.

机构信息

Laboratory of Chemical Remediation Processes, Institute for Nanomaterials, Advanced Technology and Innovation, Technical University of Liberec, Studentská 1402/2, Liberec, Czech Republic.

出版信息

Int J Nanomedicine. 2013;8:889-98. doi: 10.2147/IJN.S40599. Epub 2013 Feb 28.

Abstract

BACKGROUND

Copper oxide (CuO) nanoparticles have attracted huge attention due to catalytic, electric, optical, photonic, textile, nanofluid, and antibacterial activity depending on the size, shape, and neighboring medium. In the present paper, we synthesized CuO nanoparticles using gum karaya, a natural nontoxic hydrocolloid, by green technology and explored its potential antibacterial application.

METHODS

The CuO nanoparticles were synthesized by a colloid-thermal synthesis process. The mixture contained various concentrations of CuCl2 • 2H2O (1 mM, 2 mM, and 3 mM) and gum karaya (10 mg/mL) and was kept at 75°C at 250 rpm for 1 hour in an orbital shaker. The synthesized CuO was purified and dried to obtain different sizes of the CuO nanoparticles. The well diffusion method was used to study the antibacterial activity of the synthesized CuO nanoparticles. The zone of inhibition, minimum inhibitory concentration, and minimum bactericidal concentration were determined by the broth microdilution method recommended by the Clinical and Laboratory Standards Institute.

RESULTS

Scanning electron microscopy analysis showed CuO nanoparticles evenly distributed on the surface of the gum matrix. X-ray diffraction of the synthesized nanoparticles indicates the formation of single-phase CuO with a monoclinic structure. The Fourier transform infrared spectroscopy peak at 525 cm(-1) should be a stretching of CuO, which matches up to the B2u mode. The peaks at 525 cm(-1) and 580 cm(-1) indicated the formation of CuO nanostructure. Transmission electron microscope analyses revealed CuO nanoparticles of 4.8 ± 1.6 nm, 5.5 ± 2.5 nm, and 7.8 ± 2.3 nm sizes were synthesized with various concentrations of CuCl2 • 2H2O (1 mM, 2 mM, and 3 mM). X-ray photoelectron spectroscopy profiles indicated that the O 1s and Cu 2p peak corresponding to the CuO nanoparticles were observed. The antibacterial activity of the synthesized nanoparticles was tested against Gram-negative and positive cultures.

CONCLUSION

The formed CuO nanoparticles are small in size (4.8 ± 1.6 nm), highly stable, and have significant antibacterial action on both the Gram classes of bacteria compared to larger sizes of synthesized CuO (7.8 ± 2.3 nm) nanoparticles. The smaller size of the CuO nanoparticles (4.8 ± 1.6 nm) was found to be yielding a maximum zone of inhibition compared to the larger size of synthesized CuO nanoparticles (7.8 ± 2.3 nm). The results also indicate that increase in precursor concentration enhances an increase in particle size, as well as the morphology of synthesized CuO nanoparticles.

摘要

背景

氧化铜 (CuO) 纳米粒子因其催化、电气、光学、光子学、纺织、纳米流体和抗菌活性而备受关注,具体取决于其大小、形状和相邻介质。在本文中,我们使用天然无毒水凝胶卡拉胶通过绿色技术合成了氧化铜纳米粒子,并探索了其在潜在抗菌应用中的可能性。

方法

通过胶体-热合成法合成氧化铜纳米粒子。混合物中含有不同浓度的 CuCl2·2H2O(1 mM、2 mM 和 3 mM)和卡拉胶(10 mg/mL),并在轨道摇床中在 75°C 下以 250 rpm 的速度保持 1 小时。合成的 CuO 经过纯化和干燥,得到不同尺寸的氧化铜纳米粒子。采用琼脂扩散法研究合成的 CuO 纳米粒子的抗菌活性。采用临床和实验室标准协会推荐的肉汤微量稀释法测定抑菌浓度、最小抑菌浓度和最小杀菌浓度。

结果

扫描电子显微镜分析表明,氧化铜纳米粒子均匀分布在胶基质表面。合成纳米粒子的 X 射线衍射表明形成了具有单斜结构的单相 CuO。在 525 cm(-1) 处的傅里叶变换红外光谱峰应为 CuO 的拉伸,与 B2u 模式相匹配。在 525 cm(-1) 和 580 cm(-1) 处的峰表明形成了 CuO 纳米结构。透射电子显微镜分析表明,用不同浓度的 CuCl2·2H2O(1 mM、2 mM 和 3 mM)合成了 4.8±1.6nm、5.5±2.5nm 和 7.8±2.3nm 尺寸的 CuO 纳米粒子。X 射线光电子能谱分析表明,观察到对应于氧化铜纳米粒子的 O 1s 和 Cu 2p 峰。合成纳米粒子的抗菌活性测试了对革兰氏阴性和阳性培养物的影响。

结论

与较大尺寸(7.8±2.3nm)的合成氧化铜纳米粒子相比,形成的氧化铜纳米粒子尺寸较小(4.8±1.6nm)、高度稳定,对革兰氏细菌均具有显著的抗菌作用。与较大尺寸的合成氧化铜纳米粒子(7.8±2.3nm)相比,较小尺寸的 CuO 纳米粒子(4.8±1.6nm)产生了最大的抑菌圈。结果还表明,前体浓度的增加会增加颗粒尺寸,以及合成 CuO 纳米粒子的形态。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验