正畸粘结至瓷质材料：一项系统评价
Orthodontic bonding to porcelain: a systematic review.
作者信息
Grewal Bach Gursimrit K, Torrealba Ysidora, Lagravère Manuel O
机构信息
a Undergraduate student, Faculty of Science, Concordia University College of Alberta, Edmonton, Alberta, Canada.
出版信息
Angle Orthod. 2014 May;84(3):555-60. doi: 10.2319/083013-636.1. Epub 2013 Dec 10.
Abstract
OBJECTIVE
To use a systematic review to determine which materials and technique/protocol present the highest success rate in bonding brackets to porcelain surfaces.
MATERIALS AND METHODS
Different databases were searched without limitations up to July 2013. Additionally, the bibliographies of the finally selected articles were hand searched to identify any relevant publications that were not identified earlier. In vitro and in vivo articles were included.
RESULTS
No in vivo articles were found that fulfilled the inclusion criteria. A total of 45 in vitro articles met all inclusion criteria. They were published between 2000 to July 2013.
CONCLUSIONS
The best protocol described in this review is the etching of 9.6% hydrofluoric acid for 1 minute, rinsed for 30 seconds, and then air-dried. The etching of hydrofluoric acid should be followed by an application of silane. Considering the harmful effects of etching with hydrofluoric acid, another appropriate suggestion is mechanical roughening with sandblasting followed by an application of silane.
摘要
目的
采用系统评价来确定在将托槽粘结至瓷表面时，哪种材料及技术/方案具有最高的成功率。
材料与方法
检索不同数据库至2013年7月，无任何限制。此外，对最终选定文章的参考文献进行手工检索，以识别任何早期未识别出的相关出版物。纳入体外和体内研究文章。
结果
未找到符合纳入标准的体内研究文章。共有45篇体外研究文章符合所有纳入标准。它们发表于2000年至2013年7月之间。
结论
本综述中描述的最佳方案是用9.6%氢氟酸蚀刻1分钟，冲洗30秒，然后空气干燥。氢氟酸蚀刻后应使用硅烷。考虑到氢氟酸蚀刻的有害影响，另一个合适的建议是用喷砂进行机械粗化，然后使用硅烷。
相似文献
1
Orthodontic bonding to porcelain: a systematic review.正畸粘结至瓷质材料：一项系统评价
Angle Orthod. 2014 May;84(3):555-60. doi: 10.2319/083013-636.1. Epub 2013 Dec 10.
2
Enamel etching for bonding fixed orthodontic braces.用于粘结固定正畸矫治器的牙釉质酸蚀处理
Cochrane Database Syst Rev. 2013 Nov 25;2013(11):CD005516. doi: 10.1002/14651858.CD005516.pub2.
3
Self-Etching Primer Or Hydrofluoric Acid: Effects On the Bond Strength Stability of a Leucite-Based Glass-Ceramic.自酸蚀底漆或氢氟酸：对白榴石基微晶玻璃粘结强度稳定性的影响
J Adhes Dent. 2025 Jun 11;27:115-122. doi: 10.3290/j.jad.c_2092.
4
Is zirconia surface etching a viable alternative to airborne particle abrasion? A systematic review and meta-analysis of in vitro studies.氧化锆表面酸蚀是否可以替代喷砂处理？一项系统评价和体外研究的荟萃分析。
J Dent. 2024 Dec;151:105394. doi: 10.1016/j.jdent.2024.105394. Epub 2024 Oct 5.
5
Surface modification effect on the repair bond strength of hybrid and non-hybrid ceramics.表面改性对混合和非混合陶瓷修复粘结强度的影响。
BMC Oral Health. 2025 Jul 9;25(1):1131. doi: 10.1186/s12903-025-06527-9.
6
Self-etch primers and conventional acid-etch technique for orthodontic bonding: a systematic review and meta-analysis.自酸蚀处理剂和传统酸蚀技术在正畸粘接中的应用：系统评价和荟萃分析。
Am J Orthod Dentofacial Orthop. 2012 Jul;142(1):83-94. doi: 10.1016/j.ajodo.2012.02.023.
7
Comparison of shear bond strength of orthodontic brackets bonded to human teeth with and without fluorotic enamel: A systematic review and meta-analysis of experimental in vitro studies.正畸托槽粘结于有氟斑牙釉质和无氟斑牙釉质的人牙上的剪切粘结强度比较：一项体外实验研究的系统评价和荟萃分析
Orthod Craniofac Res. 2023 May;26(2):141-150. doi: 10.1111/ocr.12602. Epub 2022 Aug 25.
8
Adhesives for bonded molar tubes during fixed brace treatment.固定矫治器治疗中用于粘结磨牙颊面管的粘结剂。
Cochrane Database Syst Rev. 2017 Feb 23;2(2):CD008236. doi: 10.1002/14651858.CD008236.pub3.
9
Comparison of the effectiveness of inhaler devices in asthma and chronic obstructive airways disease: a systematic review of the literature.吸入装置在哮喘和慢性阻塞性气道疾病中的有效性比较：文献系统评价
Health Technol Assess. 2001;5(26):1-149. doi: 10.3310/hta5260.
10
Initial arch wires for tooth alignment during orthodontic treatment with fixed appliances.固定矫治器正畸治疗中用于牙齿排齐的初始弓丝。
Cochrane Database Syst Rev. 2013 Apr 30;2013(4):CD007859. doi: 10.1002/14651858.CD007859.pub3.
引用本文的文献
1
Influence of cement type on the bond strength of orthodontic bands to zirconia crowns.水门汀类型对正畸带环与氧化锆全冠粘结强度的影响。
BMC Oral Health. 2025 Mar 18;25(1):397. doi: 10.1186/s12903-025-05615-0.
2
Optimizing cleaning procedures for MEP residues: insights from a novel HPLC-MS analysis.优化 MEP 残留的清洗程序：来自新型高效液相色谱 - 质谱分析的见解
Clin Oral Investig. 2025 Feb 19;29(2):141. doi: 10.1007/s00784-025-06208-5.
3
assessment of chemical surface treatments on the shear bond strength of metal orthodontic brackets to CAD/CAM provisional materials.金属正畸托槽与CAD/CAM临时材料之间剪切粘结强度的化学表面处理评估
Front Dent Med. 2024 Dec 12;5:1494484. doi: 10.3389/fdmed.2024.1494484. eCollection 2024.
4
Shear bond strength and ARI scores of metal brackets to glazed glass ceramics and zirconia: an in vitro study investigating surface treatment protocols.金属托槽与釉质玻璃陶瓷和氧化锆之间的剪切粘结强度及抗脱粘指数评分：一项探究表面处理方案的体外研究
BMC Oral Health. 2024 Dec 28;24(1):1567. doi: 10.1186/s12903-024-05369-1.
5
Effect of different surface conditioning methods and low pH solutions on the shear bond strength of orthodontic brackets to newly introduced CAD/CAM materials.不同表面处理方法和低pH值溶液对正畸托槽与新引入的CAD/CAM材料之间剪切粘结强度的影响。
Heliyon. 2024 Oct 31;10(21):e40018. doi: 10.1016/j.heliyon.2024.e40018. eCollection 2024 Nov 15.
6
Shear Bond Strength of Clear Aligner Attachment Using 4-META/MMA-TBB Resin Cement on Glazed Monolithic Zirconia.在釉质整体氧化锆上使用4-META/MMA-TBB树脂水门汀的透明矫治器附件的剪切粘结强度
Polymers (Basel). 2024 Jul 11;16(14):1988. doi: 10.3390/polym16141988.
7
Can a Self-etching Primer be Effective in Bonding Aligner Attachments to Different Types of Ceramics?自酸蚀底漆能否有效地将矫治器附件粘结到不同类型的陶瓷上？
Turk J Orthod. 2024 Mar 28;37(1):30-35. doi: 10.4274/TurkJOrthod.2023.2022.173.
8
Effects of Plasma Treatment on the Strength of Bonding to Ceramic Surfaces in Orthodontics-A Comprehensive Review.等离子体处理对正畸中与陶瓷表面结合强度的影响——综述
Bioengineering (Basel). 2023 Nov 16;10(11):1323. doi: 10.3390/bioengineering10111323.
9
The effect of ceramic surface conditioning on bond strength of metallic brackets: An study.陶瓷表面处理对金属托槽粘结强度的影响：一项研究。
J Orthod Sci. 2023 Sep 4;12:42. doi: 10.4103/jos.jos_79_22. eCollection 2023.
10
Effectiveness of Porcelain Polishing Methods on the Roughness and Color Stability of CAD-CAM Ceramics after Orthodontic Bracket Debonding.正畸托槽拆除后瓷抛光方法对CAD-CAM陶瓷粗糙度和颜色稳定性的影响
Materials (Basel). 2023 Jul 11;16(14):4951. doi: 10.3390/ma16144951.
本文引用的文献
1
Effect of bonding material, etching time and silane on the bond strength of metallic orthodontic brackets to ceramic.粘结材料、酸蚀时间和硅烷对金属正畸托槽与陶瓷粘结强度的影响。
Braz Dent J. 2012;23(3):223-7. doi: 10.1590/s0103-64402012000300007.
2
Effect of etching time and light source on the bond strength of metallic brackets to ceramic.蚀刻时间和光源对金属托槽与陶瓷粘结强度的影响。
Braz Dent J. 2011;22(3):245-8. doi: 10.1590/s0103-64402011000300011.
3
Effects of cyclic loading on the bond strength of metal orthodontic brackets bonded to a porcelain surface using different conditioning protocols.循环加载对使用不同处理方案黏结于瓷表面的金属正畸托槽黏结强度的影响。
Angle Orthod. 2011 Nov;81(6):1064-9. doi: 10.2319/030211-151.1. Epub 2011 Jun 14.
4
Influence of surface conditioning on ceramic microstructure and bracket adhesion.表面处理对陶瓷微观结构和托槽粘结的影响。
Eur J Orthod. 2012 Aug;34(4):498-504. doi: 10.1093/ejo/cjr034. Epub 2011 Jun 6.
5
In vitro orthodontic bracket bonding to porcelain.体外正畸托槽黏结于瓷面。
Eur J Orthod. 2012 Aug;34(4):505-11. doi: 10.1093/ejo/cjr043. Epub 2011 Mar 29.
6
Porcelain conditioning with Nd:YAG and Er:YAG laser for bracket bonding in orthodontics.用 Nd:YAG 和 Er:YAG 激光进行瓷面预处理以粘接正畸托槽。
Lasers Med Sci. 2012 Mar;27(2):321-4. doi: 10.1007/s10103-010-0878-6. Epub 2011 Jan 18.
7
Effects of surface-conditioning methods on shear bond strength of brackets bonded to different all-ceramic materials.表面处理方法对不同全瓷材料粘结托槽的剪切粘结强度的影响。
Eur J Orthod. 2011 Dec;33(6):667-72. doi: 10.1093/ejo/cjq132. Epub 2011 Jan 12.
8
Effects of surface conditioning on the shear bond strength of orthodontic brackets bonded to temporary polycarbonate crowns.表面处理对上颌前牙临时冠粘结正畸托槽的剪切粘结强度的影响。
Am J Orthod Dentofacial Orthop. 2010 Jul;138(1):72-8. doi: 10.1016/j.ajodo.2008.08.030.
9
Influence of ceramic (feldspathic) surface treatments on the micro-shear bond strength of composite resin.陶瓷（长石质）表面处理对复合树脂微剪切粘结强度的影响。
Angle Orthod. 2010 Jul;80(4):765-70. doi: 10.2319/082409-481.1.
10
Factors affecting the shear bond strength of metal and ceramic brackets bonded to different ceramic surfaces.影响金属和陶瓷托槽在不同陶瓷表面粘结强度的因素。
Eur J Orthod. 2010 Jun;32(3):274-80. doi: 10.1093/ejo/cjp098. Epub 2009 Nov 10.
Zotero 插件