Department of Orthopaedic Surgery, University of Regensburg, Regensburg, Germany,
Knee Surg Sports Traumatol Arthrosc. 2014 Dec;22(12):2982-8. doi: 10.1007/s00167-014-3327-4. Epub 2014 Sep 26.
Rotation of the lower limbs in long-leg radiographs has a significant impact on imaging the mechanical femorotibial angle, the femoral anatomic mechanical angle, the mechanical lateral distal femoral angle (mLDFA) and the mechanical medial proximal tibial angle (mMPTA). In this study, we assessed the rotation of the lower limbs in conventional radiographs and hypothesized that the relative position of the proximal fibula to the proximal tibia on long-leg radiographs is related to the rotation of the knee joint.
Radiological examinations in different rotational positions of the knee joint (incremental 40° internal to 40° external rotation) were imitated by 50 computed tomography scans (50 patients, 25 men and 25 women). The extent of the projection overlaps of the fibula, the fibular tip and the distance from the fibular tip to the lateral cortex were determined for every rotational position.
Multiple regression analysis showed a very strong correlation between the measured fibular parameters and knee rotation between 20° of internal rotation and 40° of external rotation (R (2) ~ 0.94, p < 0.001). By means of these results, we created a formula for predicting knee rotation: [Formula: see text]This strong correlation could not be found between 20° and 40° of internal rotation.
Because incorrect internal and external rotation negatively influence the correct measurement of angles (mechanical femorotibial angle, femoral anatomic mechanical angle, the mLDFA and the mMPTA), long-leg radiographs should be assessed for proper rotation angles before measurement. Using the provided formula rotation of the lower limb in weight-bearing, long-leg radiographs can be reliably predicted.
Diagnostic study, Level II.
下肢在长腿片中的旋转对机械股骨胫骨角、股骨解剖机械角、机械外侧远端股骨角(mLDFA)和机械内侧近端胫骨角(mMPTA)的成像有显著影响。在这项研究中,我们评估了常规放射片中下肢的旋转,并假设长腿片中腓骨近端相对于胫骨近端的相对位置与膝关节的旋转有关。
通过 50 例 CT 扫描(50 例患者,25 例男性,25 例女性)模拟膝关节在不同旋转位置(内旋 40°至外旋 40°,增量 40°)的影像学检查。确定了每个旋转位置的腓骨、腓骨尖端的投影重叠程度以及腓骨尖端到外侧皮质的距离。
多元回归分析显示,测量的腓骨参数与膝关节旋转之间存在很强的相关性,旋转范围在 20°内旋和 40°外旋之间(R (2)~0.94,p<0.001)。通过这些结果,我们创建了一个预测膝关节旋转的公式:[公式:见文本]。在 20°至 40°内旋之间没有发现这种强相关性。
由于不正确的内旋和外旋会对角度(机械股骨胫骨角、股骨解剖机械角、mLDFA 和 mMPTA)的正确测量产生负面影响,因此在测量前应对长腿片的正确旋转角度进行评估。使用提供的公式,可可靠地预测负重、长腿片中的下肢旋转。
诊断研究,II 级。