Research Institute of Surface Engineering, Taiyuan University of Technology, Taiyuan, China; Institute of Health and Biomedical Innovation, Queensland University of Technology, Brisbane 4059, Australia; Australia-China Centre for Tissue Engineering and Regenerative Medicine, Queensland University of Technology, Brisbane 4059, Australia.
Research Institute of Surface Engineering, Taiyuan University of Technology, Taiyuan, China.
Acta Biomater. 2018 Aug;76:344-358. doi: 10.1016/j.actbio.2018.06.023. Epub 2018 Jun 15.
Coating materials applied for intraosseous implants must be optimized to stimulate osseointegration. Osseointegration is a temporal and spatial physiological process that not only requires interactions between osteogenesis and angiogenesis but also necessitates a favorable immune microenvironment. It is now well-documented that hierarchical nano-micro surface structures promote the long-term stability of implants, the interactions between nano-micro structure and the immune response are largely unknown. Here, we report the effects of microporous titanium (Ti) surfaces coated with nano-hydroxyapatite (HA) produced by micro-arc oxidation and steam-hydrothermal treatment (SHT) on multiple cell behavior and osseointegration. By altering the processing time of SHT it was possible to shift HA structures from nano-particles to nano-rods on the microporous Ti surfaces. Ti surfaces coated with HA nano-particles were found to modulate the inflammatory response resulting in an osteoimmune microenvironment more favorable for osteo-/angio-genesis, most likely via the activation of certain key signaling pathways (TGF-β, OPG/RANKL, and VEGF). By contrast, Ti surfaces coated with nano-rod shaped HA particles had a negative impact on osteo-/angio-genesis and osteoimmunomodulation. In vivo results further demonstrated that Ti implant surfaces decorated with HA nano-particles can stimulate new bone formation and osseointegration with enhanced interaction between osteocytes and implant surfaces. This study demonstrated that Ti implants with micro-surfaces coated with nano-particle shaped HA have a positive impact on osseointegration.
Osteo-/angio-genesis are of importance during osteointegration of the implants. Recent advances unravel that immune response of macrophages and its manipulated osteoimmunomodulation also exerts a pivotal role to determine the fate of the implant. Surface nano-micro modification has evidenced to be efficient to influence osteogenesis, however, little is known links nano-microstructured surface to immune response, as well the osteoimmunomodulation. This study demonstrates that the nano-particles decorated micro-surface, compared with the nano-rods decorated micro-surface enables osteogenesis and angiogenesis concurrently that has not been investigated previously. This study also unravels that the immune response of macrophages can be manipulated by the nano-micro surface, especially the nano-dimension matters, leading to a differential effect on osteointegration. The additional knowledge obtained from this study may provide foundation and reference for future design of the coating materials for implantable materials.
应用于骨内植入物的涂层材料必须经过优化以刺激骨整合。骨整合是一个时间和空间的生理过程,不仅需要成骨和血管生成之间的相互作用,还需要一个有利的免疫微环境。现在已经有充分的证据表明,层次纳米-微表面结构促进了植入物的长期稳定性,而纳米-微结构与免疫反应之间的相互作用在很大程度上尚不清楚。在这里,我们报告了通过微弧氧化和蒸汽-水热处理(SHT)在多孔钛(Ti)表面上涂覆纳米羟基磷灰石(HA)对多种细胞行为和骨整合的影响。通过改变 SHT 的处理时间,可以将 HA 结构从多孔 Ti 表面上的纳米颗粒转变为纳米棒。结果发现,涂覆有 HA 纳米颗粒的 Ti 表面可以调节炎症反应,从而形成更有利于成骨/血管生成的骨免疫微环境,这很可能是通过激活某些关键信号通路(TGF-β、OPG/RANKL 和 VEGF)实现的。相比之下,涂覆有纳米棒状 HA 颗粒的 Ti 表面对成骨/血管生成和骨免疫调节有负面影响。体内结果进一步表明,涂覆有 HA 纳米颗粒的 Ti 植入物表面可以刺激新骨形成和骨整合,增强成骨细胞与植入物表面的相互作用。这项研究表明,具有涂覆有纳米颗粒状 HA 的微表面的 Ti 植入物对骨整合有积极影响。
成骨/血管生成对于植入物的骨整合很重要。最近的研究表明,巨噬细胞的免疫反应及其操纵的骨免疫调节也起着决定植入物命运的关键作用。表面纳米-微结构修饰已被证明可以有效地影响成骨作用,但是,对于纳米-微结构表面与免疫反应以及骨免疫调节之间的联系,人们知之甚少。本研究表明,与涂覆有纳米棒的微表面相比,涂覆有纳米颗粒的微表面能够同时促进成骨和血管生成,这是以前尚未研究过的。本研究还揭示了巨噬细胞的免疫反应可以通过纳米-微表面进行操纵,特别是纳米尺寸很重要,这会对骨整合产生不同的影响。从这项研究中获得的额外知识可能为未来可植入材料的涂层材料设计提供基础和参考。