Ophthalmology Department, University Hospital, Saint-Etienne, France.
Laboratory Biology, Engineering and Imaging of Corneal Grafts, BiiGC, EA2521, Federative Institute of Research in Sciences and Health Engineering, Faculty of Medicine, Jean Monnet University, Saint-Etienne, France.
PLoS One. 2020 Oct 12;15(10):e0240350. doi: 10.1371/journal.pone.0240350. eCollection 2020.
The Optical Quality Analysis System (OQAS, Visiometrics) provides objective measurements of image formed onto retina, by combining quantification of ocular media transparency and of optical aberrations. In order to evaluate its contribution in the assessment of age-related cataract, we conducted a monocentric clinical study to determine the relationships between clinical grading of lens opacity, OQAS parameters, and parameters required for cataract surgery by phacoemulsification with ultrasound (called "phacodynamics"). Clinical parameters were: best-corrected visual acuity (BCVA, expressed as Log of minimal angle resolution (logMAR)) and the lens opacity classification system III (LOCS III) as a gold standard determined by two independent observers who graded total cataract and nuclear, cortical and posterior sub capsular components. The OQAS provided an objective scatter index (OSI), a modulation transfer function (MTF, expressed in cycle per degree (cpd)) and a Strehl ratio (SR) used as an aberration marker. Patients were operated on by the same surgeon using a phacoemulsification machine that provided the cumulative dissipated energy (CDE) and total ultrasound time (US time) necessary to extract the lens. Patients with poor compliance, corneal or retinal diseases impairing OSI, or who required surgical settings variation, were excluded. Twenty-one eyes of 21 patients aged 76±8 years were analyzed. They were 11 pure nuclear, 3 pure cortical, and 7 mixed cataracts. Mean LOCS III and OSI were respectively: 4.86 ±2.03 and 6.12 ±3.07 (mean±SD). Medians (10°-90° percentiles) were: for BCVA 0.30 (0.10-0.70) logMAR, for MTF cutoff 9.31 (1.54-30.57) cpd, for SR 0.071 (0.042-0.146), for CDE 8.04 (5.74-23.29) and for US time 58 (39-116) seconds. LOCS III was significantly correlated (spearman r, rs) with BCVA (rs = 0.561, p = 0.008), CDE (rs = 0.457, p = 0.038) and US time (rs = 0.647, p = 0.002). The three OQAS parameters significantly correlated (all rs ≥ 0.526, p<0.05) with BCVA, and LOCS III grading, but the strongest correlations were found with OSI for cortical components and with MTF for nuclear components: only OSI may be used objectively to assess the effect of cortical components on optical quality, and MTF cutoff-integrating scattering and aberrations-seems the best objective parameter for clinical assessment of nuclear cataracts. The three OQAS parameters were also significantly correlated (rs) with CDE, and with US time only for pure nuclear cataracts: OSI had the strongest correlations with phacodynamics (rs = 0.693, p = 0.022 with CDE and rs = 0.703, p = 0.019 US time). OSI increased with cortical components not requiring higher CDE. When measured in optimal conditions (good compliance, no retinal or ocular surface or tear film diseases), the three OQAS parameters are complementary for objective grading of cataract. In the future, they may help to optimize surgical parameters, especially energy distribution, in femtosecond laser assisted cataract surgery.
光学质量分析系统(OQAS,Visiometrics)通过量化眼部介质透明度和像差,提供对视网膜上形成的图像的客观测量。为了评估其在评估年龄相关性白内障中的作用,我们进行了一项单中心临床研究,以确定晶状体混浊的临床分级、OQAS 参数以及通过超声乳化白内障吸除术(称为“白内障动力学”)所需的光学参数之间的关系。临床参数包括:最佳矫正视力(BCVA,以最小角度分辨率的对数(logMAR)表示)和晶状体混浊分类系统 III(LOCS III)作为由两名独立观察者确定的金标准,他们对总白内障和核、皮质和后囊下成分进行分级。OQAS 提供了客观散射指数(OSI)、调制传递函数(MTF,以每度周期数(cpd)表示)和斯特雷尔比(SR),用作像差标志物。患者由同一位外科医生使用超声乳化机进行手术,该机器提供提取晶状体所需的累积耗散能量(CDE)和总超声时间(US 时间)。排除了依从性差、角膜或视网膜疾病影响 OSI 或需要手术设置变化的患者。分析了 21 名 76±8 岁患者的 21 只眼。它们是 11 只纯核性白内障、3 只纯皮质性白内障和 7 只混合性白内障。平均 LOCS III 和 OSI 分别为:4.86±2.03 和 6.12±3.07(平均值±标准差)。中位数(10°-90°百分位数)为:BCVA 0.30(0.10-0.70)logMAR、MTF 截止值 9.31(1.54-30.57)cpd、SR 0.071(0.042-0.146)、CDE 8.04(5.74-23.29)和 US 时间 58(39-116)秒。LOCS III 与 BCVA(rs=0.561,p=0.008)、CDE(rs=0.457,p=0.038)和 US 时间(rs=0.647,p=0.002)呈显著相关(斯皮尔曼 r,rs)。三个 OQAS 参数与 BCVA(所有 rs≥0.526,p<0.05)、LOCS III 分级显著相关,但与皮质成分的 OSI 和核成分的 MTF 相关性最强:只有 OSI 可用于客观评估皮质成分对光学质量的影响,而 MTF 截止值-整合散射和像差-似乎是核性白内障临床评估的最佳客观参数。三个 OQAS 参数与 CDE(rs)显著相关,与纯核性白内障的 US 时间仅相关(rs=0.693,p=0.022 与 CDE 和 rs=0.703,p=0.019 与 US 时间)。OSI 随皮质成分的增加而增加,而不需要更高的 CDE。当在最佳条件下(良好的依从性、无视网膜或眼部表面或泪膜疾病)测量时,三个 OQAS 参数可用于白内障的客观分级。在未来,它们可能有助于优化手术参数,尤其是飞秒激光辅助白内障手术中的能量分布。