Kondoh Eiichi
Integrated Graduate School of Medicine, Engineering, and Agricultural Sciences, University of Yamanashi, Kofu 400-8511, Japan.
Research Center for Chemistry, Indonesian Institute of Sciences (LIPI), Kawasan PUSPIPTEK Serpong, Tangerang Selatan, Banten 15310, Indonesia.
Nanomaterials (Basel). 2021 Jan 9;11(1):151. doi: 10.3390/nano11010151.
Ni-Pt alloy thin films have been successfully synthesized and characterized; the films were prepared by the supercritical fluid chemical deposition (SFCD) technique from Ni(hfac)3HO and Pt(hfac) precursors by hydrogen reduction. The results indicated that the deposition rate of the Ni-Pt alloy thin films decreased with increasing Ni content and gradually increased as the precursor concentration was increased. The film peaks determined by X-ray diffraction shifted to lower diffraction angles with decreasing Ni content. The deposited films were single-phase polycrystalline Ni-Pt solid solution and it exhibited smooth, continuous, and uniform distribution on the substrate for all elemental compositions as determined by scanning electron microscopy and scanning transmission electron microscopy analyses. In the X-ray photoelectron spectroscopy (XPS) analysis, the intensity of the Pt 4f peaks of the films decreased as the Ni content increased, and vice versa for the Ni 2p peak intensities. Furthermore, based on the depth profiles determined by XPS, there was no evidence of atomic diffusion between Pt and Ni, which indicated alloy formation in the film. Therefore, Ni-Pt alloy films deposited by the SFCD technique can be used as a suitable model for catalytic reactions due to their high activity and good stability for various reactions.
已成功合成并表征了镍铂合金薄膜;这些薄膜是通过超临界流体化学沉积(SFCD)技术,以Ni(hfac)3HO和Pt(hfac)为前驱体,经氢气还原制备而成。结果表明,镍铂合金薄膜的沉积速率随镍含量的增加而降低,并随着前驱体浓度的增加而逐渐升高。由X射线衍射确定的薄膜峰随着镍含量的降低向较低衍射角移动。通过扫描电子显微镜和扫描透射电子显微镜分析确定,沉积的薄膜为单相多晶镍铂固溶体,并且对于所有元素组成,其在基底上均呈现出光滑、连续且均匀的分布。在X射线光电子能谱(XPS)分析中,薄膜中Pt 4f峰的强度随镍含量的增加而降低,而Ni 2p峰强度则反之。此外,基于XPS确定的深度分布,没有证据表明铂和镍之间存在原子扩散,这表明薄膜中形成了合金。因此,通过SFCD技术沉积的镍铂合金薄膜因其对各种反应具有高活性和良好稳定性,可作为催化反应的合适模型。