Bialik-Wąs Katarzyna, Pluta Klaudia, Malina Dagmara, Barczewski Mateusz, Malarz Katarzyna, Mrozek-Wilczkiewicz Anna
Institute of Organic Chemistry and Technology, Faculty of Chemical Engineering and Technology, Cracow University of Technology, 24 Warszawska St., 31-155 Cracow, Poland.
Institute of Inorganic Chemistry and Technology, Faculty of Chemical Engineering and Technology, Cracow University of Technology, 24 Warszawska St., 31-155 Cracow, Poland.
Mater Sci Eng C Mater Biol Appl. 2021 Jan;120:111667. doi: 10.1016/j.msec.2020.111667. Epub 2020 Oct 22.
This work focuses on the influence of different amounts (5, 10, 15, 20 and 25%, v/v) of solution of Aloe vera on the chemical structure and properties of sodium alginate/poly(vinyl alcohol) hydrogel films. The polymeric matrix was prepared following the chemical cross-linking method using poly(ethylene glycol) diacrylate (PEGDA, Mn = 700 g/mol) as a cross-linking agent. First, the gel fractions of the modified hydrogels were determined and their swelling behavior in distilled water and phosphate-buffered saline (PBS) was tested. Subsequently, the following properties of the modified hydrogel materials were studied: structural (FT-IR spectra analysis), morphological (SEM analysis) and mechanical (tensile strength, elongation at break and hardness). Moreover, a thermal analysis (TG/DTG and DSC) confirmed that the SA/PVA hydrogels containing Aloe vera exhibited slightly higher thermal stability than the unmodified hydrogels, which allows concluding that a rigid and thermally stable three-dimensional structure had been obtained. Additionally, the release profile of polysaccharides from the hydrogel matrix was evaluated in PBS at 37 °C. The results show that the active substance was released in a prolonged manner, gradually, even for a week. It was found that the presence of Aloe vera inside the cross-linked polymeric network improved the active substance delivery properties of the hydrogel films. When greater amounts of Aloe vera were applied, the hydrogel had an irregular surface structure, as revealed by SEM images. The chemical structure was confirmed on the basis of an FT-IR spectral analysis. Concluding, SA/PVA/Aloe vera matrices are promising compounds and deserve further studies towards application in interactive wound dressings. Additionally, the cytotoxicity of the materials was studied and the results indicated good adhesion properties and no toxicity. In vitro experiments performed on normal human dermal fibroblasts proved excellent cell attachment on the Aloe vera hydrogel discs, which promoted cells spreading and proliferation.
本研究聚焦于不同含量(5%、10%、15%、20%和25%,v/v)的芦荟溶液对海藻酸钠/聚乙烯醇水凝胶薄膜化学结构及性能的影响。采用聚乙二醇二丙烯酸酯(PEGDA,Mn = 700 g/mol)作为交联剂,通过化学交联法制备聚合物基质。首先,测定改性水凝胶的凝胶分数,并测试其在蒸馏水和磷酸盐缓冲盐水(PBS)中的溶胀行为。随后,研究改性水凝胶材料的以下性能:结构性能(傅里叶变换红外光谱分析)、形态性能(扫描电子显微镜分析)和力学性能(拉伸强度、断裂伸长率和硬度)。此外,热分析(热重/微商热重分析和差示扫描量热分析)证实,含芦荟的海藻酸钠/聚乙烯醇水凝胶比未改性水凝胶具有略高的热稳定性,这表明已获得刚性且热稳定的三维结构。此外,在37℃的PBS中评估了水凝胶基质中多糖的释放曲线。结果表明,活性物质以持续的方式逐渐释放,甚至持续一周。研究发现,交联聚合物网络中芦荟的存在改善了水凝胶薄膜的活性物质递送性能。扫描电子显微镜图像显示,当使用更大量的芦荟时,水凝胶具有不规则的表面结构。基于傅里叶变换红外光谱分析确定了化学结构。总之,海藻酸钠/聚乙烯醇/芦荟基质是有前景的化合物,值得进一步研究其在交互式伤口敷料中的应用。此外,研究了材料的细胞毒性,结果表明其具有良好的粘附性能且无毒性。对正常人皮肤成纤维细胞进行的体外实验证明,芦荟水凝胶圆盘上细胞附着良好,促进了细胞的铺展和增殖。