Suppr超能文献

超声辅助提取花生壳中黄酮类化合物的过程强化及动力学研究。

Process intensification and kinetic studies of ultrasound-assisted extraction of flavonoids from peanut shells.

机构信息

College of Physical Science and Engineering, Yichun University, 576 Xuefu Road, Yichun, Jiangxi 336000, China.

College of Physical Science and Engineering, Yichun University, 576 Xuefu Road, Yichun, Jiangxi 336000, China.

出版信息

Ultrason Sonochem. 2021 Aug;76:105661. doi: 10.1016/j.ultsonch.2021.105661. Epub 2021 Jul 6.

Abstract

In this work, extraction of flavonoids from peanut shells has been studied in the presence of ultrasound and the results are compared with Soxhlet and heat reflux extraction for establishing the process intensification benefits. The process optimization for understanding the effects of operating parameters, such as ethanol concentration, particle size, solvent to solid ratio, extraction temperature, ultrasonic power and ultrasonic frequency, on the extraction of flavonoids has been investigated in details. The highest extraction yield (9.263 mg/g) of flavonoids was achieved in 80 min at optimum operating parameters of particle size of 0.285 mm, solvent to solid ratio of 40 ml/g, extraction temperature of 55 °C, ultrasonic power of 120 W and ultrasonic frequency of 45 kHz with 70% ethanol as the solvent. Two kinetic models (i.e. phenomenological model and Peleg's model) have been introduced to describe the extraction kinetic of flavonoids by fitting experimental data and predict kinetic parameters. Good performance with slight loss of goodness of fit of two models was found by comparing their coefficient of determination (R), root mean square error (RMSE) and/or mean percentage error (MPE) values. This work would provide the reduction of degradation and the economic evaluation for the extraction processes of flavonoids from peanut shells, as well as give a better explanation for the mechanism of ultrasound.

摘要

本工作研究了在超声作用下从花生壳中提取类黄酮的方法,并将其结果与索氏提取和热回流提取进行了比较,以确定强化过程的优势。详细研究了过程优化,以了解操作参数(如乙醇浓度、颗粒大小、溶剂与固体比、提取温度、超声功率和超声频率)对类黄酮提取的影响。在最佳操作参数下(粒径为 0.285 毫米、溶剂与固体比为 40 毫升/克、提取温度为 55°C、超声功率为 120 瓦、超声频率为 45 千赫兹,使用 70%乙醇作为溶剂),可以在 80 分钟内获得最高的类黄酮提取产率(9.263 毫克/克)。引入了两种动力学模型(即唯象模型和 Peleg 模型)来描述类黄酮的提取动力学,通过拟合实验数据来预测动力学参数。通过比较两个模型的决定系数(R)、均方根误差(RMSE)和/或平均百分比误差(MPE)值,发现这两个模型的拟合性能良好,略有拟合优度损失。这项工作将为从花生壳中提取类黄酮的降解减少和经济评估提供依据,并为超声机制提供更好的解释。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/43e5/8343109/9a519b82b004/gr1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验