Suppr超能文献

用于高效甲烷电合成的金属有机框架封装氮杂环卡宾连接的铜单原子位点催化剂

MOF Encapsulating N-Heterocyclic Carbene-Ligated Copper Single-Atom Site Catalyst towards Efficient Methane Electrosynthesis.

作者信息

Chen Shenghua, Li Wen-Hao, Jiang Wenjun, Yang Jiarui, Zhu Jiexin, Wang Liqiang, Ou Honghui, Zhuang Zechao, Chen Mingzhao, Sun Xiaohui, Wang Dingsheng, Li Yadong

机构信息

Department of Chemistry, Tsinghua University, Beijing, 100084, P. R. China.

Qian Xuesen Laboratory of Space Technology, China Academy of Space Technology, Beijing, 100094, P. R. China.

出版信息

Angew Chem Int Ed Engl. 2022 Jan 21;61(4):e202114450. doi: 10.1002/anie.202114450. Epub 2021 Dec 13.

Abstract

The exploitation of highly efficient carbon dioxide reduction (CO RR) electrocatalyst for methane (CH ) electrosynthesis has attracted great attention for the intermittent renewable electricity storage but remains challenging. Here, N-heterocyclic carbene (NHC)-ligated copper single atom site (Cu SAS) embedded in metal-organic framework is reported (2Bn-Cu@UiO-67), which can achieve an outstanding Faradaic efficiency (FE) of 81 % for the CO reduction to CH at -1.5 V vs. RHE with a current density of 420 mA cm . The CH FE of our catalyst remains above 70 % within a wide potential range and achieves an unprecedented turnover frequency (TOF) of 16.3 s . The σ donation of NHC enriches the surface electron density of Cu SAS and promotes the preferential adsorption of CHO* intermediates. The porosity of the catalyst facilitates the diffusion of CO to 2Bn-Cu, significantly increasing the availability of each catalytic center.

摘要

开发用于甲烷(CH₄)电合成的高效二氧化碳还原(CO₂RR)电催化剂,对于间歇性可再生电能存储而言备受关注,但仍具挑战性。在此,报道了一种嵌入金属有机框架的N-杂环卡宾(NHC)配位的铜单原子位点(Cu SAS)(2Bn-Cu@UiO-67),在相对于可逆氢电极(RHE)为-1.5 V时,该催化剂对于将CO₂还原为CH₄可实现81%的出色法拉第效率(FE),电流密度为420 mA cm⁻²。我们催化剂的CH₄法拉第效率在很宽的电位范围内保持在70%以上,并实现了前所未有的16.3 s⁻¹的周转频率(TOF)。NHC的σ供体作用丰富了Cu SAS的表面电子密度,并促进了CHO*中间体的优先吸附。催化剂的孔隙率有利于CO₂扩散至2Bn-Cu,显著提高了每个催化中心的利用率。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验