Department of Radiology, Washington University School of Medicine, St. Louis, Missouri.
Program in Quantitative Molecular Therapeutics, Washington University School of Medicine, St. Louis, Missouri.
Theranostics. 2021 Sep 27;11(20):9721-9737. doi: 10.7150/thno.63860. eCollection 2021.
Alpha particle emitting radiopharmaceuticals are generating considerable interest for the treatment of disseminated metastatic disease. Molecular imaging of the distribution of these agents is critical to safely and effectively maximize the clinical potential of this emerging drug class. The present studies aim to investigate the feasibility and limitations of quantitative SPECT for Ra, Ac and Th. Three state-of-the-art SPECT/CT systems were investigated: the GE Discovery NM/CT 670, the GE Optima NM/CT 640, and the Siemens Symbia T6. A series of phantoms, including the NEMA IEC Body phantom, were used to compare and calibrate each camera. Additionally, anthropomorphic physical tumor and vertebrae phantoms were developed and imaged to evaluate the quantitative imaging protocol. This work describes and validates a methodology to calibrate each clinical system. The efficiency of each gamma camera was analyzed and compared. Using the calibration factors obtained with the NEMA phantom, we were able to quantify the activity in 3D-printed tissue phantoms with an error of 2.1%, 3.5% and 11.8% for Ra, Ac, and Th, respectively. The present study validates that quantitative SPECT/CT imaging of Ra, Ac, and Th is achievable but that careful considerations for camera configuration are required. These results will aid in future implementation of SPECT-based patient studies and will help to identify the limiting factors for accurate image-based quantification with alpha particle emitting radionuclides.
发射 α 粒子的放射性药物在治疗转移性疾病方面引起了相当大的兴趣。这些药物的分布的分子成像对于安全有效地最大限度地发挥这一新出现的药物类别具有重要意义。本研究旨在研究定量 SPECT 对 Ra、Ac 和 Th 的可行性和局限性。研究了三种最先进的 SPECT/CT 系统:GE Discovery NM/CT 670、GE Optima NM/CT 640 和 Siemens Symbia T6。使用一系列包括 NEMA IEC 体模在内的体模来比较和校准每个相机。此外,还开发并成像了拟人化物理肿瘤和椎骨体模,以评估定量成像方案。 这项工作描述并验证了校准每个临床系统的方法。分析并比较了每个伽马相机的效率。使用 NEMA 体模获得的校准因子,我们能够定量地对 3D 打印组织体模中的活性进行成像,对于 Ra、Ac 和 Th,误差分别为 2.1%、3.5%和 11.8%。 本研究验证了 Ra、Ac 和 Th 的定量 SPECT/CT 成像是可行的,但需要对相机配置进行仔细考虑。这些结果将有助于未来实施基于 SPECT 的患者研究,并有助于确定基于图像的精确定量成像的限制因素,对于发射 α 粒子的放射性核素。