Dahlke Dennis, Drakoulis Petros, Fernández García Anaida, Kaiser Susanna, Karavarsamis Sotiris, Mallis Michail, Oliff William, Sakellari Georgia, Belmonte-Hernández Alberto, Alvarez Federico, Zarpalas Dimitrios
German Aerospace Center (DLR), 12489 Berlin, Germany.
Visual Computing Lab, Information Technologies Institute, Centre for Research and Technology Hellas (CERTH), 57001 Thermi, Greece.
Sensors (Basel). 2024 Apr 30;24(9):2864. doi: 10.3390/s24092864.
In dynamic and unpredictable environments, the precise localization of first responders and rescuers is crucial for effective incident response. This paper introduces a novel approach leveraging three complementary localization modalities: visual-based, Galileo-based, and inertial-based. Each modality contributes uniquely to the final Fusion tool, facilitating seamless indoor and outdoor localization, offering a robust and accurate localization solution without reliance on pre-existing infrastructure, essential for maintaining responder safety and optimizing operational effectiveness. The visual-based localization method utilizes an RGB camera coupled with a modified implementation of the ORB-SLAM2 method, enabling operation with or without prior area scanning. The Galileo-based localization method employs a lightweight prototype equipped with a high-accuracy GNSS receiver board, tailored to meet the specific needs of first responders. The inertial-based localization method utilizes sensor fusion, primarily leveraging smartphone inertial measurement units, to predict and adjust first responders' positions incrementally, compensating for the GPS signal attenuation indoors. A comprehensive validation test involving various environmental conditions was carried out to demonstrate the efficacy of the proposed fused localization tool. Our results show that our proposed solution always provides a location regardless of the conditions (indoors, outdoors, etc.), with an overall mean error of 1.73 m.
在动态且不可预测的环境中,第一响应者和救援人员的精确定位对于有效的事件响应至关重要。本文介绍了一种新颖的方法,该方法利用三种互补的定位模式:基于视觉的、基于伽利略的和基于惯性的。每种模式都对最终的融合工具做出独特贡献,有助于实现无缝的室内和室外定位,提供一种强大而准确的定位解决方案,无需依赖预先存在的基础设施,这对于维护响应者安全和优化运营效率至关重要。基于视觉的定位方法利用RGB相机以及ORB-SLAM2方法的改进实现,无论是否进行过区域扫描均可运行。基于伽利略的定位方法采用配备高精度GNSS接收板的轻型原型,以满足第一响应者的特定需求。基于惯性的定位方法利用传感器融合,主要借助智能手机惯性测量单元,逐步预测和调整第一响应者的位置,以补偿室内GPS信号的衰减。进行了一项涉及各种环境条件的全面验证测试,以证明所提出的融合定位工具的有效性。我们的结果表明,无论条件如何(室内、室外等),我们提出的解决方案总能提供一个位置,总体平均误差为1.73米。