Łętocha Anna, Miastkowska Małgorzata, Sikora Elżbieta, Michalczyk Alicja, Liszka-Skoczylas Marta, Witczak Mariusz
Cracow University of Technology, Faculty of Chemical Engineering and Technology, 31-155 Cracow, Poland.
Lukasiewicz-Research Network-Institute of Industrial Organic Chemistry, 03-236 Warsaw, Poland.
Molecules. 2024 Dec 19;29(24):5984. doi: 10.3390/molecules29245984.
Oleogels (organogels) are systems resembling a solid substance based on the gelation of organic solvents (oil or non-polar liquid) through components of low molecular weight or oil-soluble polymers. Such compounds are organogelators that produce a thermoreversible three-dimensional gel network that captures liquid organic solvents. Oleogels based on natural oils are attracting more attention due to their numerous advantages, such as their unsaturated fatty acid contents, ease of preparation, and safety of use. As a result of the research, two oleogels were developed, into which freeze-dried alginate carriers with a probiotic, , were incorporated. Two techniques were used to produce probiotic-loaded capsules-extrusion and emulsification. Alginate beads obtained by the extrusion process have a size of approximately 1.2 mm, while much smaller microspheres were obtained using the emulsification technique, ranging in size from 8 to 17 µm. The trehalose was added as a cryoprotectant to improve the survival rate of probiotics in freeze-dried alginate carriers. The encapsulation efficiency for both of the methods applied, the emulsification and the extrusion technique, was high, with levels of 90% and 87%, respectively. The obtained results showed that the production method of probiotic-loaded microspheres influence the bacterial viability. The better strain survival in the developed systems was achieved in the case of microspheres produced by the emulsification (reduction in bacterial cell viability in the range of 1.98-3.97 log in silica oleogel and 2.15-3.81 log in sucragel oleogel after 7 and 30 days of storage) than by the extrusion technique (after a week and a month of oleogel storage, the decrease in cell viability was 2.52-4.52 log in silica oleogel and 2.48-4.44 log in sucragel oleogel).
油凝胶(有机凝胶)是一种基于有机溶剂(油或非极性液体)通过低分子量成分或油溶性聚合物凝胶化而形成的类似固体物质的体系。这类化合物是有机凝胶剂,能形成捕获液态有机溶剂的热可逆三维凝胶网络。基于天然油脂的油凝胶因其诸多优点,如不饱和脂肪酸含量高、易于制备和使用安全等,正吸引着越来越多的关注。研究结果开发出了两种油凝胶,并将含有益生菌的冻干藻酸盐载体加入其中。采用了两种技术来制备载益生菌胶囊——挤出法和乳化法。通过挤出工艺获得的藻酸盐珠粒尺寸约为1.2毫米,而使用乳化技术获得的微球则小得多,尺寸在8至17微米之间。添加海藻糖作为冷冻保护剂,以提高益生菌在冻干藻酸盐载体中的存活率。所应用的两种方法,即乳化法和挤出法,包封效率都很高,分别为90%和87%。所得结果表明,载益生菌微球的生产方法会影响细菌活力。在所开发的体系中,通过乳化法生产的微球(在硅胶油凝胶和蔗糖油凝胶中储存7天和30天后,细菌细胞活力降低1.98 - 3.97对数和2.15 - 3.81对数)比通过挤出技术生产的微球(在油凝胶储存一周和一个月后,硅胶油凝胶中细胞活力降低2.52 - 4.52对数,蔗糖油凝胶中降低2.48 - 4.44对数)能实现更好的菌株存活。