Marnauza Mikelis, Sjökvist Robin, Kraina Azemina, Jacobsson Daniel, Dick Kimberly A
Centre for Analysis and Synthesis and NanoLund, Lund University, 22100 Lund, Sweden.
National Centre for High Resolution Electron Microscopy, Lund University, 22100 Lund, Sweden.
ACS Nanosci Au. 2025 Apr 15;5(3):208-216. doi: 10.1021/acsnanoscienceau.5c00015. eCollection 2025 Jun 18.
Combining multiple III-V materials into axial nanowire heterostructures has enabled the fabrication of custom nanowire-based devices useful for a wide range of applications. However, our ability to form axial heterostructures between arbitrary combinations of III-V compounds is impeded by a lack of information on the dynamics of the heterojunction formation process, often resulting in suboptimal heterostructure morphologies, particularly for materials including Sb. In this work, we utilize environmental transmission electron microscopy to examine the formation of GaSb/GaAs heterojunctions in Au-seeded nanowires . We demonstrate that the growth parameter window for successful GaSb/GaAs heterostructure formation is very narrow and requires the growth of a ternary GaSb As segment. Furthermore, we show that as the nanowire changes the composition from GaSb to GaAs, the nanoparticle and nanowire morphologies are highly dynamic. At the end of the transition, we observe that the nanoparticle volume is halved and the nanowire diameter is reduced from ≈40 to ≈30 nm at the liquid-solid interface. Moreover, the nanowire growth rate increases by a factor of 7, when GaAs composition is reached, at our optimized growth conditions. Additionally, we are able to observe that the change in the crystal phase from GaSb zincblende (ZB) to GaAs wurtzite (WZ) happens via a mixed ZB-4H-WZ regime and is dependent not only on the nanowire composition but also on the vapor-phase composition in the growth chamber. These results offer unique insight into the formation dynamics of axial nanowire heterostructures, elucidating the interplay between all phases and growth species.
将多种III-V族材料组合成轴向纳米线异质结构,使得制造适用于广泛应用的定制纳米线基器件成为可能。然而,由于缺乏关于异质结形成过程动力学的信息,我们在III-V族化合物的任意组合之间形成轴向异质结构的能力受到阻碍,这通常会导致异质结构形态不理想,特别是对于含锑的材料。在这项工作中,我们利用环境透射电子显微镜来研究金籽纳米线中GaSb/GaAs异质结的形成。我们证明,成功形成GaSb/GaAs异质结构的生长参数窗口非常窄,并且需要生长一个三元GaSb As段。此外,我们表明,随着纳米线的组成从GaSb变为GaAs,纳米颗粒和纳米线的形态具有高度的动态性。在转变结束时,我们观察到纳米颗粒的体积减半,并且在液-固界面处纳米线的直径从约40nm减小到约30nm。此外,在我们优化的生长条件下,当达到GaAs组成时,纳米线的生长速率增加了7倍。此外,我们能够观察到晶体相从GaSb闪锌矿(ZB)到GaAs纤锌矿(WZ)的变化是通过混合的ZB-4H-WZ状态发生的,并且不仅取决于纳米线的组成,还取决于生长室中的气相组成。这些结果为轴向纳米线异质结构的形成动力学提供了独特的见解,阐明了所有相和生长物种之间的相互作用。