Kenny M A, Pollock H M, Minshew B H, Casillas E, Schoenknecht F D
Antimicrob Agents Chemother. 1980 Jan;17(1):55-62. doi: 10.1128/AAC.17.1.55.
Seven lots of Mueller-Hinton agar were examined for calcium and magnesium contents and their distribution in pools or compartments. Gel disruption and centrifugation yielded the soluble cations, which varied from 9 to 113% of the total calcium and from 76 to 102% of the total magnesium. Throughout the experiments, a standardized disk diffusion test, using Pseudomonas aeruginosa (ATCC 27852) and a 10-mug gentamicin disk, served as an indicator for medium performance. Zone diameters correlated well with the sums of the soluble calcium and magnesium values in the different lots (r = -0.85). Ionized calcium, presumably the biologically active ion, was measured with a calcium-specific electrode. It represented only a fraction of the soluble calcium pool in three lots. Autoclaving resulted in shifts of the cations between the different pools. Addition of magnesium to one medium lot resulted in shifts of soluble and ionized calcium, indicating an interdependence of calcium and magnesium, and zone diameters correlated with soluble magnesium (r = -0.98), soluble calcium (r = -0.96), and ionized calcium (r = -0.96) in this experiment. Manipulation of one medium to match the performance of another showed that excess amounts of both ions were required to obtain similar performance. Satisfactory performance of an individual medium can be obtained by cation supplementation, but simple adjustment will not suffice for all media. The interaction of the other cation pool components must also be evaluated.
对七批穆勒-欣顿琼脂进行了钙和镁含量及其在池或隔室中分布的检测。凝胶破碎和离心得到可溶性阳离子,其含量占总钙的9%至113%,占总镁的76%至102%。在整个实验过程中,使用铜绿假单胞菌(ATCC 27852)和一个含10μg庆大霉素的圆片进行标准化纸片扩散试验,以此作为培养基性能的指标。抑菌圈直径与不同批次中可溶性钙和镁值的总和具有良好的相关性(r = -0.85)。使用钙特异性电极测量了离子化钙,推测其为生物活性离子。在三批样品中,离子化钙仅占可溶性钙池的一小部分。高压灭菌导致阳离子在不同池之间发生转移。向一批培养基中添加镁导致可溶性钙和离子化钙发生转移,表明钙和镁之间存在相互依存关系,并且在该实验中抑菌圈直径与可溶性镁(r = -0.98)、可溶性钙(r = -0.96)和离子化钙(r = -0.96)相关。对一种培养基进行处理以使其性能与另一种培养基匹配,结果表明需要过量的两种离子才能获得相似的性能。通过阳离子补充可以使单个培养基获得令人满意的性能,但简单的调整对所有培养基并不足够。还必须评估其他阳离子池成分之间的相互作用。