White Curt M, Strazisar Brian R, Granite Evan J, Hoffman James S, Pennline Henry W
DOE, National Energy Technology Laboratory, Pittsburgh, Pennsylvania 15236, USA.
J Air Waste Manag Assoc. 2003 Jun;53(6):645-715. doi: 10.1080/10473289.2003.10466206.
The topic of global warming as a result of increased atmospheric CO2 concentration is arguably the most important environmental issue that the world faces today. It is a global problem that will need to be solved on a global level. The link between anthropogenic emissions of CO2 with increased atmospheric CO2 levels and, in turn, with increased global temperatures has been well established and accepted by the world. International organizations such as the United Nations Framework Convention on Climate Change (UNFCCC) and the Intergovernmental Panel on Climate Change (IPCC) have been formed to address this issue. Three options are being explored to stabilize atmospheric levels of greenhouse gases (GHGs) and global temperatures without severely and negatively impacting standard of living: (1) increasing energy efficiency, (2) switching to less carbon-intensive sources of energy, and (3) carbon sequestration. To be successful, all three options must be used in concert. The third option is the subject of this review. Specifically, this review will cover the capture and geologic sequestration of CO2 generated from large point sources, namely fossil-fuel-fired power gasification plants. Sequestration of CO2 in geological formations is necessary to meet the President's Global Climate Change Initiative target of an 18% reduction in GHG intensity by 2012. Further, the best strategy to stabilize the atmospheric concentration of CO2 results from a multifaceted approach where sequestration of CO2 into geological formations is combined with increased efficiency in electric power generation and utilization, increased conservation, increased use of lower carbon-intensity fuels, and increased use of nuclear energy and renewables. This review covers the separation and capture of CO2 from both flue gas and fuel gas using wet scrubbing technologies, dry regenerable sorbents, membranes, cryogenics, pressure and temperature swing adsorption, and other advanced concepts. Existing commercial CO2 capture facilities at electric power-generating stations based on the use of monoethanolamine are described, as is the Rectisol process used by Dakota Gasification to separate and capture CO2 from a coal gasifier. Two technologies for storage of the captured CO2 are reviewed--sequestration in deep unmineable coalbeds with concomitant recovery of CH4 and sequestration in deep saline aquifers. Key issues for both of these techniques include estimating the potential storage capacity, the storage integrity, and the physical and chemical processes that are initiated by injecting CO2 underground. Recent studies using computer modeling as well as laboratory and field experimentation are presented here. In addition, several projects have been initiated in which CO2 is injected into a deep coal seam or saline aquifer. The current status of several such projects is discussed. Included is a commercial-scale project in which a million tons of CO2 are injected annually into an aquifer under the North Sea in Norway. The review makes the case that this can all be accomplished safely with off-the-shelf technologies. However, substantial research and development must be performed to reduce the cost, decrease the risks, and increase the safety of sequestration technologies. This review also includes discussion of possible problems related to deep injection of CO2. There are safety concerns that need to be addressed because of the possibilities of leakage to the surface and induced seismic activity. These issues are presented along with a case study of a similar incident in the past. It is clear that monitoring and verification of storage will be a crucial part of all geological sequestration practices so that such problems may be avoided. Available techniques include direct measurement of CO2 and CH4 surface soil fluxes, the use of chemical tracers, and underground 4-D seismic monitoring. Ten new hypotheses were formulated to describe what happens when CO2 is pumped into a coal seam. These hypotheses provide significant insight into the fundamental chemical, physical, and thermodynamic phenomena that occur during coal seam sequestration of CO2.
大气中二氧化碳浓度增加导致全球变暖这一话题,可以说是当今世界面临的最重要的环境问题。这是一个全球性问题,需要在全球层面上加以解决。人为排放的二氧化碳与大气中二氧化碳水平升高之间的联系,进而与全球气温升高之间的联系,已经得到充分确立并为世界所公认。诸如《联合国气候变化框架公约》(UNFCCC)和政府间气候变化专门委员会(IPCC)等国际组织已经成立,以应对这一问题。目前正在探索三种方案,在不对生活水平造成严重负面影响的情况下,稳定大气中温室气体(GHG)水平和全球气温:(1)提高能源效率,(2)转向碳强度较低的能源,(3)碳封存。要取得成功,必须协同使用这三种方案。第三种方案是本综述的主题。具体而言,本综述将涵盖从大型点源,即化石燃料发电气化厂产生的二氧化碳的捕集和地质封存。将二氧化碳封存在地质构造中,对于实现总统的全球气候变化倡议目标,即到2012年将温室气体强度降低18%是必要的。此外,稳定大气中二氧化碳浓度的最佳策略来自多方面的方法,即将二氧化碳封存在地质构造中与提高发电和利用效率、增加节约、更多使用低碳强度燃料以及更多使用核能和可再生能源相结合。本综述涵盖了使用湿式洗涤技术、干式可再生吸附剂、膜、低温技术、变压吸附和变温吸附以及其他先进概念,从烟气和燃料气中分离和捕集二氧化碳。描述了基于使用单乙醇胺的发电站现有的商业二氧化碳捕集设施,以及达科他气化公司用于从煤气化器中分离和捕集二氧化碳的低温甲醇洗工艺。综述了两种捕集到的二氧化碳的储存技术——在深部不可开采煤层中封存并伴生甲烷回收,以及在深部盐水层中封存。这两种技术的关键问题包括估计潜在储存容量、储存完整性以及将二氧化碳注入地下引发的物理和化学过程。这里介绍了最近使用计算机建模以及实验室和现场实验的研究。此外,已经启动了几个将二氧化碳注入深部煤层或盐水层的项目。讨论了几个此类项目的现状。其中包括一个商业规模的项目,每年向挪威北海之下的一个含水层注入100万吨二氧化碳。该综述表明,这一切都可以通过现成的技术安全实现。然而,必须进行大量的研发工作,以降低成本、减少风险并提高封存技术的安全性。本综述还包括对与二氧化碳深部注入可能相关的问题的讨论。由于存在向地表泄漏和诱发地震活动的可能性,存在一些需要解决的安全问题。这些问题连同过去一次类似事件的案例研究一起呈现。显然,储存的监测和核查将是所有地质封存实践的关键部分,以便避免此类问题。可用技术包括直接测量二氧化碳和甲烷的地表土壤通量、使用化学示踪剂以及地下四维地震监测。提出了十个新的假设,以描述将二氧化碳注入煤层时会发生什么。这些假设为二氧化碳煤层封存过程中发生的基本化学、物理和热力学现象提供了重要见解。