Ainslie Kristy M, Bachelder Eric M, Borkar Sachin, Zahr Alisar S, Sen Ayusman, Badding John V, Pishko Michael V
Department of Chemical Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802, USA.
Langmuir. 2007 Jan 16;23(2):747-54. doi: 10.1021/la060948s.
Here, we described the in vitro biocompatibility of a novel nanostructured surface composed of PTFE as a potential polymer for the prevention of adverse host reactions to implanted devices. The foreign body response is characterized at the tissue-material interface by several layers of macrophages and large multinucleated cells known as foreign body giant cells (FBGC), and a fibrous capsule. The nanofibers of nanofibrous PTFE (nPTFE) range in size from 20 to 30 nm in width and 3-4 mm in length. Glass surfaces coated with nPTFE (produced by jet-blowing of PTFE 601A) were tested under in vitro conditions to characterize the amount of protein adsorption, cell adhesion, and cell viability. We have shown that nPTFE adsorbs 495 +/- 100 ng of bovine serum albumin (BSA) per cm2. This level was considerably higher than planar PTFE, most likely due to the increase in hydrophobicity and available surface area, both a result of the nanoarchitecture. Endothelial cells and macrophages were used to determine the degree of cell adsorption on the surface of the nanostructured polymer. Both cell types were significantly more round and occupied less area on nPTFE as compared to tissue culture polystyrene (TCPS). Furthermore, a larger majority of the cells on the nPTFE were dead compared to TCPS, at dead-to-live ratios of 778 +/- 271 to 1 and 23 +/- 5.6 to 1, respectively. Since there was a high amount of cell death (due to either apoptosis or necrosis), and the foreign body response is a form of chronic inflammation, an 18 cytokine Luminex panel was performed on the supernatant from macrophages adherent on nPTFE and TCPS. As a positive control for inflammation, lipopolysaccharide (LPS) was added to macrophages on TCPS to estimate the maximum inflammation response of the macrophages. From the data presented with respect to IL-1, TNF-alpha, IFN-gamma, and IL-5, we concluded that nPTFE is nonimmunogenic and should not yield a huge inflammatory response in vivo, and cell death observed on the surface of nPTFE was likely due to apoptosis resulting from the inability of cells to spread on these surface. On the basis of the production of IL-1, IL-6, IL-4, and GM-CSF, we concluded that FBGC formation on nPTFE may be decreased as compared to materials known to elicit FBGC formation in vivo.
在此,我们描述了一种由聚四氟乙烯(PTFE)构成的新型纳米结构表面的体外生物相容性,该聚四氟乙烯作为一种潜在的聚合物,可用于预防宿主对植入装置产生的不良反应。异物反应在组织 - 材料界面的特征是有几层巨噬细胞和称为异物巨细胞(FBGC)的大型多核细胞,以及一个纤维囊。纳米纤维聚四氟乙烯(nPTFE)的纳米纤维宽度在20至30纳米之间,长度为3 - 4毫米。在体外条件下测试了涂覆有nPTFE(通过PTFE 601A的喷射吹制生产)的玻璃表面,以表征蛋白质吸附量、细胞粘附和细胞活力。我们已经表明,nPTFE每平方厘米吸附495±100纳克牛血清白蛋白(BSA)。这个水平明显高于平面PTFE,这很可能是由于纳米结构导致的疏水性增加和可用表面积增加。使用内皮细胞和巨噬细胞来确定细胞在纳米结构聚合物表面的吸附程度。与组织培养聚苯乙烯(TCPS)相比,这两种细胞类型在nPTFE上明显更圆且占据的面积更小。此外,与TCPS相比,nPTFE上更大比例的细胞死亡,死 - 活比分别为778±271比1和23±5.6比1。由于存在大量细胞死亡(由于凋亡或坏死),并且异物反应是一种慢性炎症形式,因此对粘附在nPTFE和TCPS上的巨噬细胞的上清液进行了18种细胞因子的Luminex检测。作为炎症的阳性对照,将脂多糖(LPS)添加到TCPS上的巨噬细胞中,以估计巨噬细胞的最大炎症反应。根据关于白细胞介素 - 1(IL - 1)、肿瘤坏死因子 - α(TNF - α)、干扰素 - γ(IFN - γ)和白细胞介素 - 5(IL - 5)的数据,我们得出结论,nPTFE是非免疫原性的,在体内不应产生巨大的炎症反应,并且在nPTFE表面观察到的细胞死亡可能是由于细胞无法在这些表面铺展而导致的凋亡。基于IL - 1、IL - 6、IL - 4和粒细胞 - 巨噬细胞集落刺激因子(GM - CSF)的产生,我们得出结论,与已知在体内引发FBGC形成的材料相比,nPTFE上FBGC的形成可能会减少。