Key Laboratory of Fermentation Engineering (Ministry of Education), Hubei University of Technology, Wuhan 430068, China.
Microb Cell Fact. 2011 Oct 31;10:87. doi: 10.1186/1475-2859-10-87.
Succinic acid is a building-block chemical which could be used as the precursor of many industrial products. The dissolved CO2 concentration in the fermentation broth could strongly regulate the metabolic flux of carbon and the activity of phosphoenolpyruvate (PEP) carboxykinase, which are the important committed steps for the biosynthesis of succinic acid by Actinobacillus succinogenes. Previous reports showed that succinic acid production could be promoted by regulating the supply of CO2 donor in the fermentation broth. Therefore, the effects of dissolved CO2 concentration and MgCO3 on the fermentation process should be investigated. In this article, we studied the impacts of gaseous CO2 partial pressure, dissolved CO2 concentration, and the addition amount of MgCO3 on succinic acid production by Actinobacillus succinogenes ATCC 55618. We also demonstrated that gaseous CO2 could be removed when MgCO3 was fully supplied.
An effective CO2 quantitative mathematical model was developed to calculate the dissolved CO2 concentration in the fermentation broth. The highest succinic acid production of 61.92 g/L was obtained at 159.22 mM dissolved CO2 concentration, which was supplied by 40 g/L MgCO3 at the CO2 partial pressure of 101.33 kPa. When MgCO3 was used as the only CO2 donor, a maximal succinic acid production of 56.1 g/L was obtained, which was just decreased by 7.03% compared with that obtained under the supply of gaseous CO2 and MgCO3.
Besides the high dissolved CO2 concentration, the excessive addition of MgCO3 was beneficial to promote the succinic acid synthesis. This was the first report investigating the replaceable of gaseous CO2 in the fermentation of succinic acid. The results obtained in this study may be useful for reducing the cost of succinic acid fermentation process.
琥珀酸是一种结构单元化学物质,可以作为许多工业产品的前体。发酵液中溶解的 CO2 浓度可以强烈调节碳的代谢通量和磷酸烯醇丙酮酸(PEP)羧激酶的活性,这是发酵液中琥珀酸生物合成的重要关键步骤。先前的报告表明,通过调节发酵液中 CO2 供体的供应,可以促进琥珀酸的生产。因此,应该研究溶解的 CO2 浓度和 MgCO3 对发酵过程的影响。在本文中,我们研究了气相 CO2 分压、溶解的 CO2 浓度和 MgCO3 添加量对 Actinobacillus succinogenes ATCC 55618 发酵生产琥珀酸的影响。我们还证明了当 MgCO3 完全供应时,气相 CO2 可以被去除。
建立了一个有效的 CO2 定量数学模型来计算发酵液中的溶解 CO2 浓度。在 159.22mM 溶解 CO2 浓度下,通过 40g/L MgCO3 在 101.33kPa 的 CO2 分压下获得了最高的 61.92g/L 的琥珀酸产量。当 MgCO3 被用作唯一的 CO2 供体时,获得了最高的琥珀酸产量为 56.1g/L,与在供应气态 CO2 和 MgCO3 下获得的产量相比仅下降了 7.03%。
除了高溶解的 CO2 浓度外,过量添加 MgCO3 有利于促进琥珀酸的合成。这是首次报道在琥珀酸发酵中替代气态 CO2。本研究的结果可能有助于降低琥珀酸发酵过程的成本。